IPS1025 Series

Industrial digital output expansion board based on IPS1025H in a QFN48L package

Catalog

Industrial digital output expansion board based on IPS1025H in a QFN48L package

Part	Interconnect System	Function	Platform	Utilized IC / Part	Suggested Programming Environment	Type	Contents	Number of Outputs	Switch Type	Output Configuration	Fault Protection	Output Type	Supplier Device Package	Interface	Ratio - Input:Output [custom]	Current - Output (Max) [Max]	Input Type	Rds On (Typ)	Mounting Type	Package / Case [y]	Package / Case	Package / Case [y]	Voltage - Supply (Vcc/Vdd) [Min]	Voltage - Supply (Vcc/Vdd) [Max]	Voltage - Load [Max]	Voltage - Load [Min]
STMicroelectronics X-NUCLEO-OUT15A1
STMicroelectronics IPS1025HFTR
STMicroelectronics IPS1025HTR-32
STMicroelectronics STEVAL-IFP046V1	Arduino R3 Shield, ST Morpho	Driver	Nucleo	IPS1025H-32	STM32Cube	Power Management	Board(s)
STMicroelectronics IPS1025HTR-32								1	General Purpose	High Side	Current Limiting (Adjustable), Open Load Detect, Over Temperature, Reverse Current, UVLO	N-Channel	PowerSSO-24	Logic	1:1	5 A	Non-Inverting	12 mOhm	Surface Mount	7.5 mm	24-PowerBSOP	0.295 in	8 V	60 V
STMicroelectronics IPS1025HTR
STMicroelectronics STEVAL-IFP046V1
STMicroelectronics IPS1025HFQ								1	General Purpose	High Side	Current Limiting (Fixed), Over Load, Over Temperature, UVLO	N-Channel	48-QFN (8x6)	Logic	1:1	2.4 A	Non-Inverting	12 mOhm	Surface Mount		48-VFQFN Exposed Pad				60 V	8.65 V
STMicroelectronics STEVAL-IFP040V1
STMicroelectronics X-NUCLEO-OUT15A1	Arduino R3 Shield, ST Morpho	Driver	Nucleo	IPS1025HF	STM32Cube	Power Management	Board(s)
STMicroelectronics STEVAL-IFP046V1
STMicroelectronics IPS1025HFTR
STMicroelectronics IPS1025HTR
STMicroelectronics IPS1025HFQ
STMicroelectronics IPS1025HTR-32
STMicroelectronics IPS1025HFTR								1	General Purpose	High Side	Current Limiting (Fixed), Over Temperature, Over Voltage, Short Circuit, UVLO	N-Channel	PowerSSO-24	On/Off	1:1		Non-Inverting	12 mOhm	Surface Mount	7.5 mm	24-PowerBSOP	0.295 in	8.65 V	60 V
STMicroelectronics IPS1025HTR								1	General Purpose	High Side	Current Limiting (Adjustable), Open Load Detect, Over Temperature, Reverse Current, UVLO	N-Channel	PowerSSO-24	Logic	1:1	5 A	Non-Inverting	12 mOhm	Surface Mount	7.5 mm	24-PowerBSOP	0.295 in	8 V	60 V
STMicroelectronics STEVAL-IFP040V1	Arduino R3 Shield, ST Morpho	Driver	Nucleo	IPS1025HF	STM32Cube	Power Management	Board(s)
STMicroelectronics X-NUCLEO-OUT15A1
STMicroelectronics IPS1025HFQ
STMicroelectronics IPS1025HTR
STMicroelectronics IPS1025HFTR
STMicroelectronics STEVAL-IFP045V1
STMicroelectronics STEVAL-IFP045V1	Arduino R3 Shield, ST Morpho	Driver	Nucleo	IPS1025H	STM32Cube	Power Management	Board(s)

Catalog

Industrial digital output expansion board based on IPS1025H in a QFN48L package

Key Features

• Based on the IPS1025H single high-side switch, which features:

- Operating range up to 60 V

- Low-power dissipation (RON(MAX)= 25 mΩ)

- Fast decay for inductive loads

- Smart driving of capacitive loads

- Undervoltage lock-out

- Overload and overtemperature protections

- QFN48L 8x6 mm package

Description

The STEVAL-IFP045V1 is an industrial digital output expansion board. It provides a powerful and flexible environment for the evaluation of the driving and diagnostic capabilities of the IPS1025H single high-side smart power solid state relay, in a digital output module connected to 2.5 A industrial loads. The STEVAL-IFP045V1 can interface with the microcontroller on the STM32 Nucleo via 5 kV optocouplers driven by GPIO pins and Arduino R3 connectors. The expansion board can be connected to either a NUCLEO-F401RE or a NUCLEO-G431RB development board. It is also possible to evaluate a system composed of up to four stacked STEVAL-IFP045V1 expansion boards. As an example, a system with four STEVAL-IFP045V1 expansion boards allows you to evaluate a quad channel digital output module.