TLV9001 Series

One-channel, 1-MHz rail-to-rail input and output 1.8-V to 5.5-V operational amplifier

Catalog(5 parts)

Part	Mounting Type	Current - Supply▲▼	Number of Circuits▲▼	Output Type	Voltage - Supply Span (Min)▲▼	Gain Bandwidth Product▲▼	Current - Output / Channel▲▼	Operating Temperature▲▼	Operating Temperature▲▼	Amplifier Type	Current - Input Bias▲▼	Slew Rate▲▼	Supplier Device Package	Package / Case	Voltage - Input Offset▲▼	Voltage - Supply Span (Max)▲▼
Texas Instruments TLV9001IDPWR CMOS Amplifier 1 Circuit Rail-to-Rail 5-X2SON (0.8x0.8)	Surface Mount	0.00005999999848427251 A	1 ul	Rail-to-Rail	1.7999999523162842 V	1000000 Hz	0.03999999910593033 A	-40 °C	125 °C	CMOS	4.999999980020986e-12 A	2000000 V/s	5-X2SON (0.8x0.8)	4-XFDFN Exposed Pad	0.00039999998989515007 V	5.5 V
Texas Instruments TLV9001IDCKR CMOS Amplifier 1 Circuit Rail-to-Rail SC-70-5	Surface Mount	0.00005999999848427251 A	1 ul	Rail-to-Rail	1.7999999523162842 V	1000000 Hz	0.03999999910593033 A	-40 °C	125 °C	CMOS	4.999999980020986e-12 A	2000000 V/s	SC-70-5	5-TSSOP, SC-70-5, SOT-353	0.00039999998989515007 V	5.5 V
Texas Instruments TLV9001TIDCKR CMOS Amplifier 1 Circuit Rail-to-Rail SC-70-5	Surface Mount	0.00005999999848427251 A	1 ul	Rail-to-Rail	1.7999999523162842 V	1000000 Hz	0.03999999910593033 A	-40 °C	125 °C	CMOS	4.999999980020986e-12 A	2000000 V/s	SC-70-5	5-TSSOP, SC-70-5, SOT-353	0.00039999998989515007 V	5.5 V
Texas Instruments TLV9001UIDBVR CMOS Amplifier 1 Circuit Rail-to-Rail SOT-23-5	Surface Mount	0.00005999999848427251 A	1 ul	Rail-to-Rail	1.7999999523162842 V	1000000 Hz	0.03999999910593033 A	-40 °C	125 °C	CMOS	4.999999980020986e-12 A	2000000 V/s	SOT-23-5	SC-74A, SOT-753	0.00039999998989515007 V	5.5 V
Texas Instruments TLV9001IDBVR CMOS Amplifier 1 Circuit Rail-to-Rail SOT-23-5	Surface Mount	0.00005999999848427251 A	1 ul	Rail-to-Rail	1.7999999523162842 V	1000000 Hz	0.03999999910593033 A	-40 °C	125 °C	CMOS	4.999999980020986e-12 A	2000000 V/s	SOT-23-5	SC-74A, SOT-753	0.00039999998989515007 V	5.5 V

Key Features

• Scalable CMOS amplifier for low-cost applicationsRail-to-rail input and outputLow input offset voltage: ±0.4 mVUnity-gain bandwidth: 1 MHzLow broadband noise: 27 nV/√HzLow input bias current: 5 pALow quiescent current: 60 µA/ChUnity-gain stableInternal RFI and EMI filterOperational at supply voltages as low as 1.8 VEasier to stabilize with higher capacitive load due to resistive open-loop output impedanceExtended temperature range: –40°C to 125°CScalable CMOS amplifier for low-cost applicationsRail-to-rail input and outputLow input offset voltage: ±0.4 mVUnity-gain bandwidth: 1 MHzLow broadband noise: 27 nV/√HzLow input bias current: 5 pALow quiescent current: 60 µA/ChUnity-gain stableInternal RFI and EMI filterOperational at supply voltages as low as 1.8 VEasier to stabilize with higher capacitive load due to resistive open-loop output impedanceExtended temperature range: –40°C to 125°C

Description

The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices. The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions. The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA. Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages. The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices. The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions. The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA. Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages.