Zenode.ai Logo

TPS775 Series

500-mA, 10-V, low-IQ, low-dropout voltage regulator with enable & RESET with delay

Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/

Catalog

500-mA, 10-V, low-IQ, low-dropout voltage regulator with enable & RESET with delay

PartVoltage - Output (Min/Fixed)Protection FeaturesCurrent - Quiescent (Iq)Supplier Device PackageOperating Temperature [Max]Operating Temperature [Min]Output TypeMounting TypePackage / CasePackage / CasePSRRNumber of RegulatorsOutput ConfigurationCurrent - OutputVoltage - Input (Max) [Max]Control FeaturesVoltage - Output (Max) [Max]Output TypePackage / Case [custom]Package / Case [custom]Voltage Dropout (Max)
Texas Instruments
TPS77525D
2.5 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
Texas Instruments
TPS77501D
1.5 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
5.5 V
Adjustable
Texas Instruments
TPS77516PWPR
1.6 V
Over Current, Over Temperature, Reverse Polarity
125 µA
20-HTSSOP
125 °C
-40 °C
27.03 °C/W
Surface Mount
20-PowerTSSOP
60 dB
1
Positive
500 mA
10 V
Enable, Reset
0.173 in
4.4 mm
Texas Instruments
TPS77533PWP
3.3 V
Over Current, Over Temperature, Reverse Polarity
125 µA
20-HTSSOP
125 °C
-40 °C
27.03 °C/W
Surface Mount
20-PowerTSSOP
60 dB
1
Positive
500 mA
10 V
Enable, Reset
0.173 in
4.4 mm
0.29 V
Texas Instruments
TPS77518PWP
1.8 V
Over Current, Over Temperature, Reverse Polarity
125 µA
20-HTSSOP
125 °C
-40 °C
27.03 °C/W
Surface Mount
20-PowerTSSOP
60 dB
1
Positive
500 mA
10 V
Enable, Reset
0.173 in
4.4 mm
Texas Instruments
TPS77516DR
1.6 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
Texas Instruments
TPS77515D
1.5 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
Texas Instruments
TPS77516D
1.6 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
Texas Instruments
TPS77518DR
1.8 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
Texas Instruments
TPS77501PWP
1.5 V
Over Current, Over Temperature, Reverse Polarity
125 µA
20-HTSSOP
125 °C
-40 °C
Surface Mount
20-PowerTSSOP
60 dB
1
Positive
500 mA
10 V
Enable, Reset
5.5 V
Adjustable
0.173 in
4.4 mm
Texas Instruments
TPS77533DR
3.3 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
0.29 V
Texas Instruments
TPS77525PWP
2.5 V
Over Current, Over Temperature, Reverse Polarity
125 µA
20-HTSSOP
125 °C
-40 °C
27.03 °C/W
Surface Mount
20-PowerTSSOP
60 dB
1
Positive
500 mA
10 V
Enable, Reset
0.173 in
4.4 mm
Texas Instruments
TPS77533D
3.3 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
0.29 V
Texas Instruments
TPS77533PWPR
3.3 V
Over Current, Over Temperature, Reverse Polarity
125 µA
20-HTSSOP
125 °C
-40 °C
27.03 °C/W
Surface Mount
20-PowerTSSOP
60 dB
1
Positive
500 mA
10 V
Enable, Reset
0.173 in
4.4 mm
0.29 V
Texas Instruments
TPS77518D
1.8 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
Texas Instruments
TPS77515DR
1.5 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
27.03 °C/W
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
Texas Instruments
TPS77501DR
1.5 V
Over Current, Over Temperature, Reverse Polarity
125 µA
8-SOIC
125 °C
-40 °C
Surface Mount
3.9 mm
8-SOIC
60 dB
1
Positive
500 mA
10 V
Enable, Reset
5.5 V
Adjustable
Texas Instruments
TPS77501PWPR
1.5 V
Over Current, Over Temperature, Reverse Polarity
125 µA
20-HTSSOP
125 °C
-40 °C
Surface Mount
20-PowerTSSOP
60 dB
1
Positive
500 mA
10 V
Enable, Reset
5.5 V
Adjustable
0.173 in
4.4 mm

Key Features

Open Drain Power-On Reset with 200ms Delay (TPS775xx)Open Drain Power Good (TPS776xx)500mA Low-Dropout Voltage RegulatorAvailable in Fixed Output and Adjustable VersionsDropout Voltage to 169mV (Typ) at 500mA (TPS77x33)Ultralow 85µA Typical Quiescent CurrentFast Transient Response2% Tolerance Over Specified Conditions for Fixed-Output Versions8-Pin SOIC and 20-Pin TSSOP PowerPAD™ (PWP) PackagesThermal Shutdown ProtectionAPPLICATIONSFPGA PowerDSP Core and I/O VoltagesPowerPAD is a trademark of Texas Instruments.All other trademarks are the property of their respective owners.Open Drain Power-On Reset with 200ms Delay (TPS775xx)Open Drain Power Good (TPS776xx)500mA Low-Dropout Voltage RegulatorAvailable in Fixed Output and Adjustable VersionsDropout Voltage to 169mV (Typ) at 500mA (TPS77x33)Ultralow 85µA Typical Quiescent CurrentFast Transient Response2% Tolerance Over Specified Conditions for Fixed-Output Versions8-Pin SOIC and 20-Pin TSSOP PowerPAD™ (PWP) PackagesThermal Shutdown ProtectionAPPLICATIONSFPGA PowerDSP Core and I/O VoltagesPowerPAD is a trademark of Texas Instruments.All other trademarks are the property of their respective owners.

Description

AI
The TPS775xx and TPS776xx devices are designed to have a fast transient response and be stable with a 10µF low ESR capacitor. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 169mV at an output current of 500mA for the TPS77x33) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85µA over the full range of output current, 0mA to 500mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal toEN(enable) shuts down the regulator, reducing the quiescent current to 1µA at TJ= +25°C. TheRESEToutput of the TPS775xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS775xx monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage. Power good (PG) of the TPS776xx is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS775xx and TPS776xx are offered in 1.5V, 1.6V (TPS77516 only), 1.8V, 2.5V, 2.8V (TPS77628 only), and 3.3V fixed-voltage versions and in an adjustable version (programmable over the range of 1.5V to 5.5V for the TPS77501 and 1.2V to 5.5V for the TPS77601). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS775xx and TPS776xx families are available in 8-pin SOIC and 20-pin TSSOP packages. The TPS775xx and TPS776xx devices are designed to have a fast transient response and be stable with a 10µF low ESR capacitor. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 169mV at an output current of 500mA for the TPS77x33) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85µA over the full range of output current, 0mA to 500mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal toEN(enable) shuts down the regulator, reducing the quiescent current to 1µA at TJ= +25°C. TheRESEToutput of the TPS775xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS775xx monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage. Power good (PG) of the TPS776xx is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS775xx and TPS776xx are offered in 1.5V, 1.6V (TPS77516 only), 1.8V, 2.5V, 2.8V (TPS77628 only), and 3.3V fixed-voltage versions and in an adjustable version (programmable over the range of 1.5V to 5.5V for the TPS77501 and 1.2V to 5.5V for the TPS77601). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS775xx and TPS776xx families are available in 8-pin SOIC and 20-pin TSSOP packages.