TPS56720 Series
4.5-V to 17-V, 7-A synchronous buck converter with voltage scaling
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Topology | Voltage - Input (Max)▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Output Type | Current - Output▲▼ | Mounting Type | Function | Supplier Device Package | Voltage - Output (Max)▲▼ | Frequency - Switching▲▼ | Synchronous Rectifier▲▼ | Package / Case▲▼ | Package / Case | Package / Case▲▼ | Number of Outputs▲▼ | Output Configuration | Voltage - Output (Min/Fixed)▲▼ | Voltage - Input (Min)▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS56720PWPRBuck Switching Regulator IC Positive Adjustable (Programmable) 0.6V 1 Output 7A 20-PowerTSSOP (0.173", 4.40mm Width) | Buck | 17 V | 125 °C | -40 °C | Adjustable (Programmable) | 7 A | Surface Mount | Step-Down | 20-HTSSOP | 1.8700000047683716 V | 500000 Hz | 0.004394200164824724 m | 20-PowerTSSOP | 0.004399999976158142 m | 1 ul | Positive | 0.6000000238418579 V | 4.5 V |
Key Features
• D-CAP2™ ControlInput Voltage Range: 4.5V to 17VSwitching Frequency: 500kHzOptimized for a 1.0µH to 2.2µH Inductor±1% Output Voltage AccuracyFeatures via I2C Compatible InterfaceOutput Voltage (VID): 0.6V to 1.87V in 10mVAuto-Skip Eco-mode™ ON/OFF (Light-load)Current Limit Target: 40% to 160%Enabling IC, Reading-back Power-goodHiccup Mode Protection ON/OFFIC Terminal FeaturesStart-up by Using External ResistorsOutput Voltage with VFB Pin: 0.6V to 1.87VAdjustable Soft-start,Monotonic Pre-Biased Start-upPower-goodI2C Address Programming (2bits)Cycle-by-Cycle Overcurrent Limiting ControlThermal Shutdown (TSD)Undervoltage Lockout (UVLO)TSSOP Package (PWP) with PowerPAD™D-CAP2™ ControlInput Voltage Range: 4.5V to 17VSwitching Frequency: 500kHzOptimized for a 1.0µH to 2.2µH Inductor±1% Output Voltage AccuracyFeatures via I2C Compatible InterfaceOutput Voltage (VID): 0.6V to 1.87V in 10mVAuto-Skip Eco-mode™ ON/OFF (Light-load)Current Limit Target: 40% to 160%Enabling IC, Reading-back Power-goodHiccup Mode Protection ON/OFFIC Terminal FeaturesStart-up by Using External ResistorsOutput Voltage with VFB Pin: 0.6V to 1.87VAdjustable Soft-start,Monotonic Pre-Biased Start-upPower-goodI2C Address Programming (2bits)Cycle-by-Cycle Overcurrent Limiting ControlThermal Shutdown (TSD)Undervoltage Lockout (UVLO)TSSOP Package (PWP) with PowerPAD™
Description
AI
The TPS56X20 is a synchronous DC-DC converter IC (integrated circuit) with a voltage scaling control to power up micro-processors (MCUs) requiring core voltage (VCORE) tune-ups. After the initial power-up, the output voltage can be programmed/scaled by VID codes sent over an I2C compatible bus.
This step-down (buck) converter employs an adaptive on-time D-CAP2 mode control which provides a very fast transient response with no external components. Unlike traditional voltage-/current-mode controls, the D-CAP2 supports seamless transition between PWM mode for higher load and Eco-mode™ for light load. Eco-mode maintains high efficiency in light-load.
The TPS56X20 supports both ultra-low ESR ceramic capacitors and low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP. The device is optimized for a small 1.0µH to 2.2µH inductor saving PCB area.
The TPS56X20 devices are available in the HTSSOP package.
The TPS56X20 is a synchronous DC-DC converter IC (integrated circuit) with a voltage scaling control to power up micro-processors (MCUs) requiring core voltage (VCORE) tune-ups. After the initial power-up, the output voltage can be programmed/scaled by VID codes sent over an I2C compatible bus.
This step-down (buck) converter employs an adaptive on-time D-CAP2 mode control which provides a very fast transient response with no external components. Unlike traditional voltage-/current-mode controls, the D-CAP2 supports seamless transition between PWM mode for higher load and Eco-mode™ for light load. Eco-mode maintains high efficiency in light-load.
The TPS56X20 supports both ultra-low ESR ceramic capacitors and low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP. The device is optimized for a small 1.0µH to 2.2µH inductor saving PCB area.
The TPS56X20 devices are available in the HTSSOP package.