TPS2075 Series

Pwr controller for Bus/Self Pwrd USB Hub with 3.3V LDO, 8 pwr switches, Act-high BPMode indicator

Catalog

Pwr controller for Bus/Self Pwrd USB Hub with 3.3V LDO, 8 pwr switches, Act-high BPMode indicator

Part	Mounting Type	Current - Output (Max)	Output Type	Voltage - Supply (Vdd/Vcc)	Voltage - Supply (Vcc/Vdd)	Switch Type	Number of Outputs	Rds On (Typ)	Output Configuration	Input Ratio	Output Ratio	Operating Temperature (Max)	Operating Temperature (Min)	Package Length	Package Name	Package Width	Interface	Features	Fault Protection	Voltage - Load (Max)	Voltage - Load (Min)
Texas Instruments TPS2075DBR	Surface Mount	100 mA	N-Channel	Not Required	Not Required	USB Switch	4	100 mOhm	High Side	1	4	125 °C	-40 °C	0.209 in	24-SSOP	5.3 mm	On/Off	Power Good Status Flag	Over Temperature	5.5 V	4.5 V
Texas Instruments TPS2075DB	Surface Mount	100 mA	N-Channel	Not Required	Not Required	USB Switch	4	100 mOhm	High Side	1	4	125 °C	-40 °C	0.209 in	24-SSOP	5.3 mm	On/Off	Power Good Status Flag	Over Temperature	5.5 V	4.5 V
Texas Instruments TPS2075DBG4	Surface Mount	100 mA	N-Channel	Not Required	Not Required	USB Switch	4	100 mOhm	High Side	1	4	125 °C	-40 °C	0.209 in	24-SSOP	5.3 mm	On/Off	Power Good Status Flag	Over Temperature	5.5 V	4.5 V

Catalog

Pwr controller for Bus/Self Pwrd USB Hub with 3.3V LDO, 8 pwr switches, Act-high BPMode indicator

Description

The TPS2074 and TPS2075 provide a complete USB hub power solution by incorporating three major functions: current-limited power switches for four ports, a 3.3-V 100-mA regulator, and a DP0 line control to signal attach/detach of the hub. These devices are designed to meet bus-powered and self-powered hub requirements. These devices are also designed for hybrid hub implementations and allow for automatic switching from self-powered mode to bus-powered mode if loss of self-power is experienced. This feature can be disabled by applying a logic high to the BP_DIS input Each port has a current-limited 100-mN-channel MOSFET high-side power switch for 100-mA bus-powered operation. All the N-channel MOSFETs are designed without parasitic diodes, preventing current backflow into the inputs. For applications where a 5-V regulator is needed, use the TPS2070 or TPS2071 device. The TPS2074 and TPS2075 provide a complete USB hub power solution by incorporating three major functions: current-limited power switches for four ports, a 3.3-V 100-mA regulator, and a DP0 line control to signal attach/detach of the hub. These devices are designed to meet bus-powered and self-powered hub requirements. These devices are also designed for hybrid hub implementations and allow for automatic switching from self-powered mode to bus-powered mode if loss of self-power is experienced. This feature can be disabled by applying a logic high to the BP_DIS input Each port has a current-limited 100-mN-channel MOSFET high-side power switch for 100-mA bus-powered operation. All the N-channel MOSFETs are designed without parasitic diodes, preventing current backflow into the inputs. For applications where a 5-V regulator is needed, use the TPS2070 or TPS2071 device.