TLIN24413 Series
Automotive local interconnect network transceiver with integrated voltage regulator and watchdog
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Automotive local interconnect network transceiver with integrated voltage regulator and watchdog
| Part | Receiver Hysteresis | Supplier Device Package | Type | Data Rate | Grade | Qualification | Mounting Type | Protocol | Package / Case | Duplex | Operating Temperature [Min] | Operating Temperature [Max] | Voltage - Supply [Min] | Voltage - Supply [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TLIN24413DMTTQ1 | 500 mV | 14-VSON (4.5x3) | Transceiver | 100 Kbps | Automotive | AEC-Q100 | Surface Mount, Wettable Flank | LIN | 14-VDFN Exposed Pad | Full | -40 °C | 125 °C | ||
Texas Instruments TLIN24413DMTRQ1 | 500 mV | 14-VSON (4.5x3) | Transceiver | 100 Kbps | Automotive | AEC-Q100 | Surface Mount, Wettable Flank | LIN | 14-VDFN Exposed Pad | Full | -40 °C | 125 °C | 5.5 V | 36 VDC |
Key Features
• AEC-Q100 : Qualified for automotive applicationsTemperature grade 1: –40°C To 125°C TALocal interconnect network (LIN) physical layer specification ISO/DIS 17987–4 compliant and conforms to SAE J2602 recommended practice for LIN (SeeSLLA494)Supports 12-V applications and 24 V applicationsIntegrated watchdog supervisor configurable by pin or serial peripheral interface SPIWide operating ranges5.5 V to 36 V supply voltage±58 V LIN bus fault protectionLDO output supporting 3.3 V ( TLIN24413-Q1) or 5 V ( TLIN24415-Q1)Sleep mode: Ultra-low current consumption allows wake-up event from:LIN busLocal wake up through ENLocal wake up through WAKEPower-up and down glitch-free operationProtection features:ESD protection, VSUPunder-voltage protectionTXD dominant time out (DTO) protection, Thermal shutdownUnpowered node or ground disconnection fail-safe at system levelVCCsources 70 mA with 24 VSUPat 85°CAvailable in Leadless VSON (14) package with improved automated optical inspection (AOI) capabilityAEC-Q100 : Qualified for automotive applicationsTemperature grade 1: –40°C To 125°C TALocal interconnect network (LIN) physical layer specification ISO/DIS 17987–4 compliant and conforms to SAE J2602 recommended practice for LIN (SeeSLLA494)Supports 12-V applications and 24 V applicationsIntegrated watchdog supervisor configurable by pin or serial peripheral interface SPIWide operating ranges5.5 V to 36 V supply voltage±58 V LIN bus fault protectionLDO output supporting 3.3 V ( TLIN24413-Q1) or 5 V ( TLIN24415-Q1)Sleep mode: Ultra-low current consumption allows wake-up event from:LIN busLocal wake up through ENLocal wake up through WAKEPower-up and down glitch-free operationProtection features:ESD protection, VSUPunder-voltage protectionTXD dominant time out (DTO) protection, Thermal shutdownUnpowered node or ground disconnection fail-safe at system levelVCCsources 70 mA with 24 VSUPat 85°CAvailable in Leadless VSON (14) package with improved automated optical inspection (AOI) capability
Description
AI
The TLIN2441-Q1 is a local interconnect network (LIN) physical layer transceiver, compliant to LIN 2.2A and ISO/DIS 17987–4 standards, with an integrated low dropout (LDO) voltage regulator and watchdog. The TLIN2441-Q1 watchdog can operate in window or timeout mode and can be controlled by pins or SPI. The Pin or SPI control is established at power up by the state of pin 9 (that is, High, Z-State, Low).
LIN is a single-wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The LIN receiver supports data rates up to 100 kbps for end-of-line programming. The TLIN2441-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal. The receiver converts the data stream to logic-level signals that are sent to the microprocessor through the open-drain RXD pin. The TLIN2441-Q1 reduces system complexity by providing a 3.3 V or 5 V rail with up to 70 mA of current to power microprocessors, sensors or other devices. The TLIN2441-Q1 has an optimized current-limited wave-shaping driver which reduces electromagnetic emissions (EME).
The TLIN2441-Q1 is a local interconnect network (LIN) physical layer transceiver, compliant to LIN 2.2A and ISO/DIS 17987–4 standards, with an integrated low dropout (LDO) voltage regulator and watchdog. The TLIN2441-Q1 watchdog can operate in window or timeout mode and can be controlled by pins or SPI. The Pin or SPI control is established at power up by the state of pin 9 (that is, High, Z-State, Low).
LIN is a single-wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The LIN receiver supports data rates up to 100 kbps for end-of-line programming. The TLIN2441-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal. The receiver converts the data stream to logic-level signals that are sent to the microprocessor through the open-drain RXD pin. The TLIN2441-Q1 reduces system complexity by providing a 3.3 V or 5 V rail with up to 70 mA of current to power microprocessors, sensors or other devices. The TLIN2441-Q1 has an optimized current-limited wave-shaping driver which reduces electromagnetic emissions (EME).