TPS62180 Series

4-V to 15-V, 6-A synchronous buck converter with power good, 1% accuracy, and adjustable soft start

Catalog(2 parts)

Part	Synchronous Rectifier▲▼	Topology	Output Type	Output Configuration	Supplier Device Package	Function	Mounting Type	Voltage - Input (Min)▲▼	Voltage - Input (Max)▲▼	Frequency - Switching▲▼	Package / Case	Operating Temperature▲▼	Operating Temperature▲▼	Number of Outputs▲▼	Voltage - Output (Min/Fixed)▲▼	Current - Output▲▼	Utilized IC / Part	Board Type	Main Purpose	Voltage - Input▲▼	Voltage - Input▲▼	Supplied Contents	Outputs and Type	Outputs and Type▲▼	Voltage - Output▲▼
Texas Instruments TPS62180YZFT Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 6A 24-UFBGA, DSBGA		Buck	Adjustable	Positive	24-DSBGA	Step-Down	Surface Mount	4 V	15 V	2000000 Hz	24-UFBGA, DSBGA	125 °C	-40 °C	1 ul	0.8999999761581421 V	6 A
Texas Instruments TPS62180EVM-581 TPS62180 - DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board																6 A	TPS62180	Fully Populated	DC/DC, Step Down	4 V	15 V	Board(s)	Non-Isolated	1 ul	3.299999952316284 V

Key Features

• Dual Phase Balanced Peak Current ModeInput Voltage Range: 4 V to 15 VOutput Voltage Range: 0.9 V to 6 VOutput Current up to 6 ATypical Quiescent Current of 28 µAOutput Voltage Accuracy of ±1% (PWM Mode)Automatic Efficiency Enhancement (AEE™)Phase Shifted OperationAutomatic Power Save ModeAdjustable Soft StartPower Good OutputUndervoltage LockoutHICCUP Over Current ProtectionPin-to-Pin Compatible withTPS62184Over Temperature ProtectionNanoFree™ 2.10 mm x 3.10 mm DSBGA PackageCreate a Custom Design Using the TPS62180 With theWEBENCH®Power DesignerDual Phase Balanced Peak Current ModeInput Voltage Range: 4 V to 15 VOutput Voltage Range: 0.9 V to 6 VOutput Current up to 6 ATypical Quiescent Current of 28 µAOutput Voltage Accuracy of ±1% (PWM Mode)Automatic Efficiency Enhancement (AEE™)Phase Shifted OperationAutomatic Power Save ModeAdjustable Soft StartPower Good OutputUndervoltage LockoutHICCUP Over Current ProtectionPin-to-Pin Compatible withTPS62184Over Temperature ProtectionNanoFree™ 2.10 mm x 3.10 mm DSBGA PackageCreate a Custom Design Using the TPS62180 With theWEBENCH®Power Designer

Description

The TPS6218x is a synchronous dual-phase step-down DC-DC converter for low profile power rails. It operates with two identical, current balanced phases that are peak current controlled enabling use in height limited applications. With a wide operating input voltage range of 4 V to 15 V, the device is ideally suited for systems powered from multi-cell Li-Ion batteries or 12-V rails. The output current of 6 A is continuously provided by two phases of 3 A each, allowing the use of low profile external components. The phases operate out of phase, reducing switching noise significantly. The TPS6218x automatically enters Power Save Mode to maintain high efficiency down to very light loads. It also incorporates anAutomaticEfficiencyEnhancement (AEE™) for the entire duty cycle range. The device features a Power Good signal, as well as an adjustable soft start. The quiescent current is typically 28 µA, it is able to run in 100% mode, and it has no duty cycle limitation even at lowest output voltage. The TPS6218x, available in adjustable and fixed output voltage options, is packaged in a small 24-bump, 0.5 mm pitch DSBGA package. The TPS6218x is a synchronous dual-phase step-down DC-DC converter for low profile power rails. It operates with two identical, current balanced phases that are peak current controlled enabling use in height limited applications. With a wide operating input voltage range of 4 V to 15 V, the device is ideally suited for systems powered from multi-cell Li-Ion batteries or 12-V rails. The output current of 6 A is continuously provided by two phases of 3 A each, allowing the use of low profile external components. The phases operate out of phase, reducing switching noise significantly. The TPS6218x automatically enters Power Save Mode to maintain high efficiency down to very light loads. It also incorporates anAutomaticEfficiencyEnhancement (AEE™) for the entire duty cycle range. The device features a Power Good signal, as well as an adjustable soft start. The quiescent current is typically 28 µA, it is able to run in 100% mode, and it has no duty cycle limitation even at lowest output voltage. The TPS6218x, available in adjustable and fixed output voltage options, is packaged in a small 24-bump, 0.5 mm pitch DSBGA package.