BQ2954 Series

Switch-mode Li-ion charge controller

Link to Manufacturer Page: https://www.ti.com/

Catalog

Switch-mode Li-ion charge controller

Part	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case	Package / Case	Mounting Type	Programmable Features	Voltage - Supply (Max) [Max]	Current - Charging	Supplier Device Package	Battery Chemistry
Texas Instruments BQ2954PN	85 °C	-40 °C	0.3 in, 7.62 mm	16-DIP	Through Hole	Current	5.5 V	Constant	16-PDIP	Lithium Ion
Texas Instruments BQ2954SNTR	85 °C	-40 °C	0.154 in, 3.9 mm Width	16-SOIC	Surface Mount	Current	5.5 V	Constant	16-SOIC	Lithium Ion
Texas Instruments BQ2954SN	85 °C	-40 °C	0.154 in, 3.9 mm Width	16-SOIC	Surface Mount	Current	5.5 V	Constant	16-SOIC	Lithium Ion
Texas Instruments BQ2954SNTRG4	85 °C	-40 °C	0.154 in, 3.9 mm Width	16-SOIC	Surface Mount	Current	5.5 V	Constant	16-SOIC	Lithium Ion

Key Features

• Safe charge of Li-Ion battery packsPulse-width modulation control for current and voltage regulationProgrammable high-side/low-side current-senseFast charge terminated by selectable minimum current; safety backup termination at maximum timePrecharge qualification detects shorted or damaged cells and conditions batteryCharging continuously qualified by temperature and voltage limitsDirect LED control outputs to display charge status and fault conditionsSafe charge of Li-Ion battery packsPulse-width modulation control for current and voltage regulationProgrammable high-side/low-side current-senseFast charge terminated by selectable minimum current; safety backup termination at maximum timePrecharge qualification detects shorted or damaged cells and conditions batteryCharging continuously qualified by temperature and voltage limitsDirect LED control outputs to display charge status and fault conditions

Description

The bq2954 Li-Ion Charge-Management IC uses a flexible pulse-width modulation regulator to control voltage and current during charging. The regulator frequency is set by an external capacitor for design flexibility. The switch-mode design minimizes power dissipation. For safety, the bq2954 inhibits fast charging until the battery voltage and temperature are within configured limits. If the battery voltage is less than the low-voltage threshold, the bq2954 provides low-current conditioning of the battery. For charge qualification, the bq2954 uses an external thermistor to measure battery temperature. Charging begins when power is applied or the battery is inserted The bq2954 charges a battery in two phases. First a constant-current phase replenishes approximately 70% of battery capacity. Then a voltage- regulation phase completes the battery charge. The bq2954 provides status indications of all charger states and faults for accurate determination of the battery and charge-system conditions. The bq2954 Li-Ion Charge-Management IC uses a flexible pulse-width modulation regulator to control voltage and current during charging. The regulator frequency is set by an external capacitor for design flexibility. The switch-mode design minimizes power dissipation. For safety, the bq2954 inhibits fast charging until the battery voltage and temperature are within configured limits. If the battery voltage is less than the low-voltage threshold, the bq2954 provides low-current conditioning of the battery. For charge qualification, the bq2954 uses an external thermistor to measure battery temperature. Charging begins when power is applied or the battery is inserted The bq2954 charges a battery in two phases. First a constant-current phase replenishes approximately 70% of battery capacity. Then a voltage- regulation phase completes the battery charge. The bq2954 provides status indications of all charger states and faults for accurate determination of the battery and charge-system conditions.