TPS610985 Series
Low input voltage, 3-V output voltage, synchronous boost converter with integrated load switch
Manufacturer: Texas Instruments
Catalog(2 parts)
| Part | Voltage - Input▲▼ | Voltage - Input▲▼ | Current - Output▲▼ | Utilized IC / Part | Regulator Topology | Main Purpose | Supplied Contents | Voltage - Output | Board Type | Outputs and Type | Outputs and Type▲▼ | Voltage/Current - Output 2▲▼ | Mounting Type | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage/Current - Output 1▲▼ | Topology | Number of Outputs▲▼ | w/Supervisor▲▼ | Package / Case | w/LED Driver▲▼ | w/Sequencer▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS610985EVM-782TPS610985 - DC/DC, Step Up 1, Non-Isolated Outputs Evaluation Board | 4.5 V | 0.699999988079071 V | 0.20000000298023224 A | TPS610985 | Boost | DC/DC, Step Up | Board(s) | 3V | Fully Populated | Non-Isolated | 1 ul | |||||||||||||
Texas Instruments TPS610985DSETPMIC - Voltage Regulators - Linear Switching 2 Output Step-Up (Boost) Synchronous (1), Linear (LDO) (1) 6-WSON (1.5x1.5) | 0.20000000298023224 A, 3 V | Surface Mount | 85 °C | -40 °C | 0.3499999940395355 A, 3 V | Linear (LDO) (1), Step-Up (Boost) Synchronous (1) | 2 ul | 6-WFDFN | 4.5 V | 0.699999988079071 V |
Key Features
• 300-nA ultra-low IQin low power modeStart-up into load at 0.7-V input voltageOperating input voltage from 0.7 V to 4.5 VSelectable output voltages up to 4.3 VMinimum 350-mA switch peak current limitIntegrated LDO/load switchTwo modes controlled by MODE pinActive mode: dual outputs at set valuesLow power mode: LDO/load switch off; boost keeps onAutomatic pass-throughUp to 88% efficiency at 10-µA load from 2 V to 3.3 V conversion (low power mode)Up to 93% efficiency at 5-mA to 100-mA load from 2-V to 3.3-V conversion1.5-mm × 1.5-mm WSON package300-nA ultra-low IQin low power modeStart-up into load at 0.7-V input voltageOperating input voltage from 0.7 V to 4.5 VSelectable output voltages up to 4.3 VMinimum 350-mA switch peak current limitIntegrated LDO/load switchTwo modes controlled by MODE pinActive mode: dual outputs at set valuesLow power mode: LDO/load switch off; boost keeps onAutomatic pass-throughUp to 88% efficiency at 10-µA load from 2 V to 3.3 V conversion (low power mode)Up to 93% efficiency at 5-mA to 100-mA load from 2-V to 3.3-V conversion1.5-mm × 1.5-mm WSON package
Description
AI
The TPS61098x is an ultra-low power solution for products powered by either a one-cell or two-cell alkaline, NiCd or NiMH, one-cell coin cell or one-cell Li-Ion or Li-polymer battery. It integrates either a Low-dropout Linear Regulator (LDO) or a load switch with a boost converter and provides two output rails. The boost output V(MAIN)is designed as an always-on supply for a main system, and the LDO or load switch output V(SUB)is to power peripheral devices.
The TPS61098x has two modes controlled by the MODE pin: Active mode and Low Power mode. In Active mode, both outputs are enabled with enhanced response performance. In Low Power mode, the LDO or load switch is disabled to disconnect peripherals. The TPS61098x consumes only 300-nA quiescent current and can achieve up to 88% efficiency at 10-µA load in Low Power mode.
The TPS61098x supports automatic pass-through function. When input voltage is higher than a pass-through threshold, the boost converter stops switching and passes the input voltage to the VMAIN rail; when input voltage is lower than the threshold, the boost works in Boost mode and regulates the output at the target value. The TPS61098x provides different versions for different output set values.
The TPS61098x can provide up to 50-mA total output current at 0.7-V input to 3.3-V output conversion. The boost is based on a hysteretic controller topology using a synchronous rectifier to obtain maximum efficiency at minimal quiescent current.
The TPS61098x is available in 1.5-mm × 1.5-mm WSON package to enable small circuit layout size.
The TPS61098x is an ultra-low power solution for products powered by either a one-cell or two-cell alkaline, NiCd or NiMH, one-cell coin cell or one-cell Li-Ion or Li-polymer battery. It integrates either a Low-dropout Linear Regulator (LDO) or a load switch with a boost converter and provides two output rails. The boost output V(MAIN)is designed as an always-on supply for a main system, and the LDO or load switch output V(SUB)is to power peripheral devices.
The TPS61098x has two modes controlled by the MODE pin: Active mode and Low Power mode. In Active mode, both outputs are enabled with enhanced response performance. In Low Power mode, the LDO or load switch is disabled to disconnect peripherals. The TPS61098x consumes only 300-nA quiescent current and can achieve up to 88% efficiency at 10-µA load in Low Power mode.
The TPS61098x supports automatic pass-through function. When input voltage is higher than a pass-through threshold, the boost converter stops switching and passes the input voltage to the VMAIN rail; when input voltage is lower than the threshold, the boost works in Boost mode and regulates the output at the target value. The TPS61098x provides different versions for different output set values.
The TPS61098x can provide up to 50-mA total output current at 0.7-V input to 3.3-V output conversion. The boost is based on a hysteretic controller topology using a synchronous rectifier to obtain maximum efficiency at minimal quiescent current.
The TPS61098x is available in 1.5-mm × 1.5-mm WSON package to enable small circuit layout size.