Catalog(1 parts)
| Part | Mounting Type | Current - Output High, Low▲▼ | Current - Output High, Low▲▼ | Number of Elements▲▼ | Supplier Device Package | Output Type | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Package / Case | Number of Bits per Element▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments 74ACT16623DLTransceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP | Surface Mount | 0.024000000208616257 A | 0.024000000208616257 A | 2 ul | 48-SSOP | 3-State | 85 °C | -40 °C | 5.5 V | 4.5 V | 48-BSSOP (0.295", 7.50mm Width) | 8 ul |
Key Features
• Members of the Texas Instruments WidebusTMFamilyInputs are TTL-Voltage CompatibleFlow-Through Architecture Optimizes PCB LayoutDistributed VCCand GND Pin Configuration Minimizes High-Speed Switching NoiseEPICTM(Enhanced-Performance Implanted CMOS) 1-m ProcessPackage Options Include Plastic 300-mil Shrink Small-Outline (DL) Packages Using 25-mil Center-to-Center Pin Spacings and 380-mil Fine-Pitch Ceramic Flat (WD) Packages Using 25-mil Center-to-Center Pin SpacingsEPIC and Widebus are trademarks of Texas Instruments Incorporated.Members of the Texas Instruments WidebusTMFamilyInputs are TTL-Voltage CompatibleFlow-Through Architecture Optimizes PCB LayoutDistributed VCCand GND Pin Configuration Minimizes High-Speed Switching NoiseEPICTM(Enhanced-Performance Implanted CMOS) 1-m ProcessPackage Options Include Plastic 300-mil Shrink Small-Outline (DL) Packages Using 25-mil Center-to-Center Pin Spacings and 380-mil Fine-Pitch Ceramic Flat (WD) Packages Using 25-mil Center-to-Center Pin SpacingsEPIC and Widebus are trademarks of Texas Instruments Incorporated.
Description
AI
The 'ACT16623 are 16-bit transceivers designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing.
These devices can be used as two 8-bit transceivers or one 16-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the output-enable (and OEAB) inputs. The output-enable inputs can be used to disable the device so that the buses are effectively isolated.
The dual-enable configuration gives the bus transceiver the capability to store data by simultaneously enablingand OEAB. Each output reinforces its input in this transceiver configuration. When both control inputs are enabled and all other data sources to the two sets of bus lines are at high impedance, the bus lines remain at their last states.
The 74ACT16623 is packaged in TI's shrink small-outline package, which provides twice the functionality of standard small-outline packages in the same printed-circuit-board area.
The 54ACT16623 is characterized for operation over the full military temperature range of -55°C to 125°C. The 74ACT16623 is characterized for operation from -40°C to 85°C.
The 'ACT16623 are 16-bit transceivers designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing.
These devices can be used as two 8-bit transceivers or one 16-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the output-enable (and OEAB) inputs. The output-enable inputs can be used to disable the device so that the buses are effectively isolated.
The dual-enable configuration gives the bus transceiver the capability to store data by simultaneously enablingand OEAB. Each output reinforces its input in this transceiver configuration. When both control inputs are enabled and all other data sources to the two sets of bus lines are at high impedance, the bus lines remain at their last states.
The 74ACT16623 is packaged in TI's shrink small-outline package, which provides twice the functionality of standard small-outline packages in the same printed-circuit-board area.
The 54ACT16623 is characterized for operation over the full military temperature range of -55°C to 125°C. The 74ACT16623 is characterized for operation from -40°C to 85°C.