TPS6209733 Series

2-A Step Down Converter with Selectable Switching Frequency in HotRod package

Catalog(2 parts)

Part	Current - Output▲▼	Topology	Package / Case	Operating Temperature▲▼	Operating Temperature▲▼	Voltage - Output (Min/Fixed)▲▼	Number of Outputs▲▼	Voltage - Input (Max)▲▼	Voltage - Input (Min)▲▼	Output Type▲▼	Frequency - Switching▲▼	Frequency - Switching▲▼	Mounting Type	Synchronous Rectifier▲▼	Output Configuration	Supplier Device Package▲▼	Supplier Device Package▲▼	Supplier Device Package	Function
Texas Instruments TPS6209733RWKR Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A 11-PowerVFQFN	2 A	Buck	11-PowerVFQFN	125 °C	-40 °C	3.299999952316284 V	1 ul	6 V	2.5 V	27.030000686645508 °C/W	1500000 Hz	2500000 Hz	Surface Mount		Positive	2 ul	2 ul	11-VQFN-HR	Step-Down
Texas Instruments TPS6209733RWKT Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A 11-PowerVFQFN	2 A	Buck	11-PowerVFQFN	125 °C	-40 °C	3.299999952316284 V	1 ul	6 V	2.5 V	27.030000686645508 °C/W	1500000 Hz	2500000 Hz	Surface Mount		Positive	2 ul	2 ul	11-VQFN-HR	Step-Down

Key Features

• New product available:TPS62851x, 6-V, 0.5-A / 1-A / 2-A step-down converter in SOT583 packageiDCS-control topologyForced PWM or power save modeUp to 97% efficiency2.5-V to 6.0-V input voltage0.8-V to VINadjustable output voltage1.8-V and 3.3-V fixed output voltage±1% output voltage accuracyHiccup short circuit protectionProgrammable soft start-upOutput voltage trackingSelectable switching frequency100% duty cycle for lowest dropoutOutput dischargePower good outputThermal shutdown protection-40°C to 125°C operating junction temperatureAvailable in 2-mm × 2-mm VQFN packageNew product available:TPS62851x, 6-V, 0.5-A / 1-A / 2-A step-down converter in SOT583 packageiDCS-control topologyForced PWM or power save modeUp to 97% efficiency2.5-V to 6.0-V input voltage0.8-V to VINadjustable output voltage1.8-V and 3.3-V fixed output voltage±1% output voltage accuracyHiccup short circuit protectionProgrammable soft start-upOutput voltage trackingSelectable switching frequency100% duty cycle for lowest dropoutOutput dischargePower good outputThermal shutdown protection-40°C to 125°C operating junction temperatureAvailable in 2-mm × 2-mm VQFN package

Description

The TPS62097 device is a synchronous step-down converter optimized for high efficiency and noise critical applications. The devices focus on high efficiency conversion over a wide output current range. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load. The switching frequency is selectable in the range of 1.5 MHz to 2.5 MHz by an external resistor. iDCS-Control is able to be operated in forced PWM mode for low noise operation with a fixed switching frequency. To address the requirements of system power rails, the internal compensation circuit allows a large selection of external output capacitor values in excess of 150 µF. To control the inrush current during the start-up, the device provides a programmable soft start-up by an external capacitor connected to the SS/TR pin. The SS/TR pin is also used in voltage tracking configurations. The device integrates short circuit protection, power good and thermal shutdown features. The device is available in a 2-mm x 2-mm VQFN package. The new product,TPS62851x, offers reduced BOM cost, smaller total solution size and other features. The TPS62097 device is a synchronous step-down converter optimized for high efficiency and noise critical applications. The devices focus on high efficiency conversion over a wide output current range. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load. The switching frequency is selectable in the range of 1.5 MHz to 2.5 MHz by an external resistor. iDCS-Control is able to be operated in forced PWM mode for low noise operation with a fixed switching frequency. To address the requirements of system power rails, the internal compensation circuit allows a large selection of external output capacitor values in excess of 150 µF. To control the inrush current during the start-up, the device provides a programmable soft start-up by an external capacitor connected to the SS/TR pin. The SS/TR pin is also used in voltage tracking configurations. The device integrates short circuit protection, power good and thermal shutdown features. The device is available in a 2-mm x 2-mm VQFN package. The new product,TPS62851x, offers reduced BOM cost, smaller total solution size and other features.