CD74FCT541 Series
8-ch, 4.75-V to 5.25-V buffers with TTL-compatible CMOS inputs and 3-state outputs
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
8-ch, 4.75-V to 5.25-V buffers with TTL-compatible CMOS inputs and 3-state outputs
| Part | Voltage - Supply [Min] | Voltage - Supply [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Logic Type | Output Type | Number of Bits per Element | Number of Elements [custom] | Current - Output High, Low | Mounting Type | Supplier Device Package | Package / Case | Package / Case | Package / Case | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments CD74FCT541M | 4.75 V | 5.25 V | 70 °C | 0 °C | Buffer, Non-Inverting | 3-State | 8 | 1 | 15 mA, 64 mA | Surface Mount | 20-SOIC | 0.295 in, 7.5 mm | 20-SOIC | ||
Texas Instruments CD74FCT541E | 4.75 V | 5.25 V | 70 °C | 0 °C | Buffer, Non-Inverting | 3-State | 8 | 1 | 15 mA, 64 mA | Through Hole | 20-PDIP | 20-DIP | 0.3 in | 7.62 mm |
Key Features
• BiCMOS Technology With Low Quiescent PowerBuffered InputsNoninverted OutputsInput/Output Isolation From VCCControlled Output Edge Rates64-mA Output Sink CurrentOutput Voltage Swing Limited to 3.7 VSCR Latch-Up-Resistant BiCMOS Process and Circuit DesignPackage Options Include Plastic Small-Outline (M) and Shrink Small-Outline (SM) Packages and Standard Plastic (E) DIPBiCMOS Technology With Low Quiescent PowerBuffered InputsNoninverted OutputsInput/Output Isolation From VCCControlled Output Edge Rates64-mA Output Sink CurrentOutput Voltage Swing Limited to 3.7 VSCR Latch-Up-Resistant BiCMOS Process and Circuit DesignPackage Options Include Plastic Small-Outline (M) and Shrink Small-Outline (SM) Packages and Standard Plastic (E) DIP
Description
AI
The CD74FCT541 is an octal buffer/driver with 3-state outputs that is ideal for driving bus lines or buffer memory address registers and uses a small-geometry BiCMOS technology. The output stage is a combination of bipolar and CMOS transistors that limits the output high level to two diode drops below VCC. This resultant lowering of output swing (0 V to 3.7 V) reduces power-bus ringing [a source of electromagnetic interference (EMI)] and minimizes VCCbounce and ground bounce and their effects during simultaneous output switching. The output configuration also enhances switching speed and is capable of sinking 64 mA.
The 3-state control gate is a two-input AND gate with active-low inputs, so that if either output-enable (OE1\ or OE2\) input is high, all corresponding outputs are in the high-impedance state. The outputs provide noninverted data when they are not in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The CD74FCT541 is characterized for operation from 0°C to 70°C.
The CD74FCT541 is an octal buffer/driver with 3-state outputs that is ideal for driving bus lines or buffer memory address registers and uses a small-geometry BiCMOS technology. The output stage is a combination of bipolar and CMOS transistors that limits the output high level to two diode drops below VCC. This resultant lowering of output swing (0 V to 3.7 V) reduces power-bus ringing [a source of electromagnetic interference (EMI)] and minimizes VCCbounce and ground bounce and their effects during simultaneous output switching. The output configuration also enhances switching speed and is capable of sinking 64 mA.
The 3-state control gate is a two-input AND gate with active-low inputs, so that if either output-enable (OE1\ or OE2\) input is high, all corresponding outputs are in the high-impedance state. The outputs provide noninverted data when they are not in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The CD74FCT541 is characterized for operation from 0°C to 70°C.