TPS71 Series
500-mA, 10-V, low-dropout voltage regulator with enable & RESET with delay
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
500-mA, 10-V, low-dropout voltage regulator with enable & RESET with delay
| Part | Number of Regulators | Current - Quiescent (Iq) | Current - Supply (Max) [Max] | Supplier Device Package | Mounting Type | PSRR [Min] | PSRR [Max] | Package / Case | Package / Case | Package / Case | Voltage - Output (Min/Fixed) | Protection Features | Voltage Dropout (Max) [Max] | Control Features | Output Type | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Input (Max) [Max] | Current - Output | Output Configuration | Voltage Dropout (Max) | Output Type | Voltage - Output (Max) [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS7150QP | 1 | 350 µA | 460 µA | 8-PDIP | Through Hole | 52 dB | 55 dB | 8-DIP | 0.3 in | 7.62 mm | 5 V | Over Temperature, Reverse Polarity | 0.23 V | Enable, Power Good | 27.03 °C/W | 125 °C | -40 °C | 10 V | 500 mA | Positive | |||
Texas Instruments TPS7133QDR | 1 | 350 µA | 460 µA | 8-SOIC | Surface Mount | 54 dB | 59 dB | 8-SOIC | 3.9 mm | 3.3 V | Over Temperature, Reverse Polarity | Enable, Power Good | 27.03 °C/W | 125 °C | -40 °C | 10 V | 500 mA | Positive | 0.4 V | ||||
Texas Instruments TPS7150QD | 1 | 350 µA | 460 µA | 8-SOIC | Surface Mount | 52 dB | 55 dB | 8-SOIC | 3.9 mm | 5 V | Over Temperature, Reverse Polarity | 0.23 V | Enable, Power Good | 27.03 °C/W | 125 °C | -40 °C | 10 V | 500 mA | Positive | ||||
Texas Instruments TPS7148QP | 1 | 350 µA | 460 µA | 8-PDIP | Through Hole | 50 dB | 53 dB | 8-DIP | 0.3 in | 7.62 mm | 4.85 V | Over Current | 27.03 °C/W | 125 °C | -40 °C | 10 V | 500 mA | Positive | 0.25 V | ||||
Texas Instruments TPS7148QD | 1 | 350 µA | 460 µA | 8-SOIC | Surface Mount | 50 dB | 53 dB | 8-SOIC | 3.9 mm | 4.85 V | Over Current | 27.03 °C/W | 125 °C | -40 °C | 10 V | 500 mA | Positive | 0.25 V | |||||
Texas Instruments TPS7150QDR | 1 | 350 µA | 460 µA | 8-SOIC | Surface Mount | 52 dB | 55 dB | 8-SOIC | 3.9 mm | 5 V | Over Temperature, Reverse Polarity | 0.23 V | Enable, Power Good | 27.03 °C/W | 125 °C | -40 °C | 10 V | 500 mA | Positive | ||||
Texas Instruments TPS7101QDR | 1 | 350 µA | 460 µA | 8-SOIC | Surface Mount | 54 dB | 59 dB | 8-SOIC | 3.9 mm | 1.2 V | Over Temperature, Reverse Polarity | Enable, Power Good | 125 °C | -40 °C | 10 V | 500 mA | Positive | 0.4 V | Adjustable | 9.75 V | |||
Texas Instruments TPS7101QP | 1 | 350 µA | 460 µA | 8-PDIP | Through Hole | 54 dB | 59 dB | 8-DIP | 0.3 in | 7.62 mm | 1.2 V | Over Temperature, Reverse Polarity | Enable, Power Good | 125 °C | -40 °C | 10 V | 500 mA | Positive | 0.4 V | Adjustable | 9.75 V | ||
Texas Instruments TPS7133QP | 1 | 350 µA | 460 µA | 8-PDIP | Through Hole | 54 dB | 59 dB | 8-DIP | 0.3 in | 7.62 mm | 3.3 V | Over Temperature, Reverse Polarity | Enable, Power Good | 27.03 °C/W | 125 °C | -40 °C | 10 V | 500 mA | Positive | 0.4 V | |||
Texas Instruments TPS7101QD | 1 | 350 µA | 460 µA | 8-SOIC | Surface Mount | 54 dB | 59 dB | 8-SOIC | 3.9 mm | 1.2 V | Over Temperature, Reverse Polarity | Enable, Power Good | 125 °C | -40 °C | 10 V | 500 mA | Positive | 0.4 V | Adjustable | 9.75 V |
Key Features
• Available in 5-V, 4.85-V, and 3.3-V Fixed-Output and Adjustable VersionsVery Low-Dropout Voltage ...Maximum of 32 mV at IO= 100 mA (TPS7150)Very Low Quiescent Current – Independent of Load . . . 285 µA TypExtremely Low Sleep-State Current0.5 µA Max2% Tolerance Over Specified Conditions For Fixed-Output VersionsOutput Current Range of 0 mA to 500 mATSSOP Package Option Offers Reduced Component Height for Space-Critical ApplicationsPower-Good (PG) Status OutputAvailable in 5-V, 4.85-V, and 3.3-V Fixed-Output and Adjustable VersionsVery Low-Dropout Voltage ...Maximum of 32 mV at IO= 100 mA (TPS7150)Very Low Quiescent Current – Independent of Load . . . 285 µA TypExtremely Low Sleep-State Current0.5 µA Max2% Tolerance Over Specified Conditions For Fixed-Output VersionsOutput Current Range of 0 mA to 500 mATSSOP Package Option Offers Reduced Component Height for Space-Critical ApplicationsPower-Good (PG) Status Output
Description
AI
The TPS71xx integrated circuits are a family of micropower low-dropout (LDO) voltage regulators. An order of magnitude reduction in dropout voltage and quiescent current over conventional LDO performance is achieved by replacing the typical pnp pass transistor with a PMOS device.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (maximum of 32 mV at an output current of 100 mA for the TPS7150) and is directly proportional to the output current (see Figure 1). Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and remains independent of output loading (typically 285 µA over the full range of output current, 0 mA to 500 mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. The LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to 0.5 µA maximum at TJ= 25°C.
Voltage – Power good (PG) reports low output voltage and can be used to implement a power-on reset or a low-battery indicator.
The TPS71xx is offered in 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges (3% for adjustable version). The TPS71xx family is available in PDIP (8 pin), SO (8 pin), and TSSOP (20-pin) packages. The TSSOP has a maximum height of 1,2 mm.
The TPS71xx integrated circuits are a family of micropower low-dropout (LDO) voltage regulators. An order of magnitude reduction in dropout voltage and quiescent current over conventional LDO performance is achieved by replacing the typical pnp pass transistor with a PMOS device.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (maximum of 32 mV at an output current of 100 mA for the TPS7150) and is directly proportional to the output current (see Figure 1). Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and remains independent of output loading (typically 285 µA over the full range of output current, 0 mA to 500 mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. The LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to 0.5 µA maximum at TJ= 25°C.
Voltage – Power good (PG) reports low output voltage and can be used to implement a power-on reset or a low-battery indicator.
The TPS71xx is offered in 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges (3% for adjustable version). The TPS71xx family is available in PDIP (8 pin), SO (8 pin), and TSSOP (20-pin) packages. The TSSOP has a maximum height of 1,2 mm.