Catalog(2 parts)
| Part | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Supplier Device Package | Number of Drivers/Receivers▲▼ | Number of Drivers/Receivers▲▼ | Mounting Type | Package / Case▲▼ | Package / Case | Protocol | Operating Temperature▲▼ | Operating Temperature▲▼ | Type | Duplex | Receiver Hysteresis▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4.75 V | 5.25 V | 16-PDIP | 2 ul | 2 ul | Through Hole | 0.007619999814778566 m, 0.007619999814778566 m | 16-DIP | RS422, RS485 | 85 °C | -20 °C | Transceiver | Half | 0.05000000074505806 V | |
4.75 V | 5.25 V | 16-SO | 2 ul | 2 ul | Surface Mount | 16-SOIC (0.209", 5.30mm Width) | RS422, RS485 | 85 °C | -20 °C | Transceiver | Half | 0.05000000074505806 V |
Key Features
• Meet or Exceed Standards TIA/EIA-422-B and ITU Recommendation V.11Operate From Single 5-V Power SupplyDriver Positive and Negative Current LimitingReceiver Input Sensitivity: ±200mVReceiver Input Impedance: 12 kΩ MinDriver 3-State OutputsReceiver 3-State Outputs (SN7534050 Only)Meet or Exceed Standards TIA/EIA-422-B and ITU Recommendation V.11Operate From Single 5-V Power SupplyDriver Positive and Negative Current LimitingReceiver Input Sensitivity: ±200mVReceiver Input Impedance: 12 kΩ MinDriver 3-State OutputsReceiver 3-State Outputs (SN7534050 Only)
Description
AI
The SN7534050 and SN7534051 dual differential drivers and receivers are monolithic integrated circuits designed to meet the requirements of ANSI standards TIA/EIA-422-B and ITU Recommendations V.11.
The driver outputs provide limiting for both positive and negative currents and thermal shutdown protection from line fault conditions on transmission bus line.
The SN7534050 combines dual 3-state differential drivers and dual 3-state differential input receivers. The drivers and receivers have active-high and active-low enables, respectively which can be externally connected together to function as direction control. SN7534051 drivers each have an individual active-high enable.
The SN7534050 and SN7534051 dual differential drivers and receivers are monolithic integrated circuits designed to meet the requirements of ANSI standards TIA/EIA-422-B and ITU Recommendations V.11.
The driver outputs provide limiting for both positive and negative currents and thermal shutdown protection from line fault conditions on transmission bus line.
The SN7534050 combines dual 3-state differential drivers and dual 3-state differential input receivers. The drivers and receivers have active-high and active-low enables, respectively which can be externally connected together to function as direction control. SN7534051 drivers each have an individual active-high enable.