Zenode.ai Logo

TPS7201 Series

250-mA, 10-V, low-dropout voltage regulator with power good & enable

Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/

Catalog

250-mA, 10-V, low-dropout voltage regulator with power good & enable

PartOutput TypeMounting TypeCurrent - Quiescent (Iq)Package / CaseSupplier Device PackageVoltage - Output (Min/Fixed)Number of RegulatorsControl FeaturesProtection FeaturesCurrent - OutputVoltage - Input (Max) [Max]PSRR [Min]PSRR [Max]Output ConfigurationVoltage Dropout (Max) [Max]Operating Temperature [Max]Operating Temperature [Min]Voltage - Output (Max) [Max]Package / CasePackage / Case
Texas Instruments
TPS7201QPWG4
Adjustable
Surface Mount
80 µA
8-TSSOP (0.173", 4.40mm Width)
8-TSSOP
1.2 V
1
Enable
Over Current, Over Temperature, Under Voltage Lockout (UVLO)
250 mA
10 V
50 dB
85 dB
Positive
0.2 V
125 °C
-40 °C
9.75 V
Texas Instruments
TPS7201QDRG4
Adjustable
Surface Mount
80 µA
8-SOIC
8-SOIC
1.2 V
1
Enable
Over Current, Over Temperature, Under Voltage Lockout (UVLO)
250 mA
10 V
50 dB
85 dB
Positive
0.2 V
125 °C
-40 °C
9.75 V
3.9 mm
Texas Instruments
TPS7201QPWR
Adjustable
Surface Mount
80 µA
8-TSSOP (0.173", 4.40mm Width)
8-TSSOP
1.2 V
1
Enable
Over Current, Over Temperature, Under Voltage Lockout (UVLO)
250 mA
10 V
50 dB
85 dB
Positive
0.2 V
125 °C
-40 °C
9.75 V
Texas Instruments
TPS7201QPW
Adjustable
Surface Mount
80 µA
8-TSSOP (0.173", 4.40mm Width)
8-TSSOP
1.2 V
1
Enable
Over Current, Over Temperature, Under Voltage Lockout (UVLO)
250 mA
10 V
50 dB
85 dB
Positive
0.2 V
125 °C
-40 °C
9.75 V
Texas Instruments
TPS7201QP
Adjustable
Through Hole
80 µA
8-DIP
8-PDIP
1.2 V
1
Enable
Over Current, Over Temperature, Under Voltage Lockout (UVLO)
250 mA
10 V
50 dB
85 dB
Positive
0.2 V
125 °C
-40 °C
9.75 V
0.3 in
7.62 mm
Texas Instruments
TPS7201QD
Adjustable
Surface Mount
80 µA
8-SOIC
8-SOIC
1.2 V
1
Enable
Over Current, Over Temperature, Under Voltage Lockout (UVLO)
250 mA
10 V
50 dB
85 dB
Positive
0.2 V
125 °C
-40 °C
9.75 V
3.9 mm
Texas Instruments
TPS7201QDR
Adjustable
Surface Mount
80 µA
8-SOIC
8-SOIC
1.2 V
1
Enable
Over Current, Over Temperature, Under Voltage Lockout (UVLO)
250 mA
10 V
50 dB
85 dB
Positive
0.2 V
125 °C
-40 °C
9.75 V
3.9 mm

Key Features

Available in 5-V, 4.85-V, 3.3-V, 3.0-V, and 2.5-V Fixed-Output and Adjustable VersionsDropout Voltage <85 mV Max atIO= 100 mA (TPS7250)Low Quiescent Current, Independent of Load, 180 uA Typ8-Pin SOIC and 8-Pin TSSOP PackageOutput Regulated to ±2% Over Full Operating Range for Fixed-Output VersionsExtremely Low Sleep-State Current,0.5 uA MaxPower-Good (PG) Status OutputAvailable in 5-V, 4.85-V, 3.3-V, 3.0-V, and 2.5-V Fixed-Output and Adjustable VersionsDropout Voltage <85 mV Max atIO= 100 mA (TPS7250)Low Quiescent Current, Independent of Load, 180 uA Typ8-Pin SOIC and 8-Pin TSSOP PackageOutput Regulated to ±2% Over Full Operating Range for Fixed-Output VersionsExtremely Low Sleep-State Current,0.5 uA MaxPower-Good (PG) Status Output

Description

AI
The TPS72xx family of low-dropout (LDO) voltage regulators offers the benefits of low-dropout voltage, micropower operation, and miniaturized packaging. These regulators feature extremely low dropout voltages and quiescent currents compared to conventional LDO regulators. Offered in small-outline integrated-circuit (SOIC) packages and 8-terminal thin shrink small-outline (TSSOP), the TPS72xx series devices are ideal for cost-sensitive designs and for designs where board space is at a premium. A combination of new circuit design and process innovation has enabled the usual pnp pass transistor to be replaced by a PMOS device. Because the PMOS pass element behaves as a low-value resistor, the dropout voltage is very low - maximum of 85 mV at 100 mA of load current (TPS7250) - and is directly proportional to the load current (see Figure 1). Since the PMOS pass element is a voltage-driven device, the quiescent current is very low (300 uA maximum) and is stable over the entire range of output load current (0 mA to 250 mA). Intended for use in portable systems such as laptops and cellular phones, the low-dropout voltage and micropower operation result in a significant increase in system battery operating life. The TPS72xx also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current to 0.5 uA maximum at TJ= 25°C. Other features include a power-good function that reports low output voltage and may be used to implement a power-on reset or a low-battery indicator. The TPS72xx is offered in 2.5-V, 3-V, 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges (3% for adjustable version). The TPS72xx family of low-dropout (LDO) voltage regulators offers the benefits of low-dropout voltage, micropower operation, and miniaturized packaging. These regulators feature extremely low dropout voltages and quiescent currents compared to conventional LDO regulators. Offered in small-outline integrated-circuit (SOIC) packages and 8-terminal thin shrink small-outline (TSSOP), the TPS72xx series devices are ideal for cost-sensitive designs and for designs where board space is at a premium. A combination of new circuit design and process innovation has enabled the usual pnp pass transistor to be replaced by a PMOS device. Because the PMOS pass element behaves as a low-value resistor, the dropout voltage is very low - maximum of 85 mV at 100 mA of load current (TPS7250) - and is directly proportional to the load current (see Figure 1). Since the PMOS pass element is a voltage-driven device, the quiescent current is very low (300 uA maximum) and is stable over the entire range of output load current (0 mA to 250 mA). Intended for use in portable systems such as laptops and cellular phones, the low-dropout voltage and micropower operation result in a significant increase in system battery operating life. The TPS72xx also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current to 0.5 uA maximum at TJ= 25°C. Other features include a power-good function that reports low output voltage and may be used to implement a power-on reset or a low-battery indicator. The TPS72xx is offered in 2.5-V, 3-V, 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges (3% for adjustable version).