TLV170 Series
Single, 36-V, 1.2-MHz, low-power operational amplifier for cost-sensitive applications
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Single, 36-V, 1.2-MHz, low-power operational amplifier for cost-sensitive applications
| Part | Amplifier Type | Current - Supply | Supplier Device Package | Voltage - Supply Span (Max) [Max] | Output Type | Gain Bandwidth Product | Package / Case | Current - Input Bias | Number of Circuits | Current - Output / Channel | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Supply Span (Min) [Min] | Mounting Type | Slew Rate | Voltage - Input Offset | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TLV170IDBVR | General Purpose | 125 µA | SOT-23-5 | 36 V | Rail-to-Rail | 1.2 MHz | SC-74A, SOT-753 | 10 pA | 1 | 17 mA | 125 °C | -40 °C | 2.7 V | Surface Mount | 0.4 V/µs | 500 çV | |
Texas Instruments TLV170IDR | General Purpose | 125 µA | 8-SOIC | 36 V | Rail-to-Rail | 1.2 MHz | 8-SOIC | 10 pA | 1 | 17 mA | 125 °C | -40 °C | 2.7 V | Surface Mount | 0.4 V/µs | 500 çV | 3.9 mm |
Texas Instruments TLV170IDBVT | General Purpose | 125 µA | SOT-23-5 | 36 V | Rail-to-Rail | 1.2 MHz | SC-74A, SOT-753 | 10 pA | 1 | 17 mA | 125 °C | -40 °C | 2.7 V | Surface Mount | 0.4 V/µs | 500 çV |
Key Features
• Supply Range: 2.7 V to 36 V, ±1.35 V to ±18 VLow Noise: 22 nV/√HzEMI-Hardened with RFI-Filtered InputsInput Range Includes the Negative SupplyUnity-Gain Stable: 200-pF Capacitive LoadRail-to-Rail OutputGain Bandwidth: 1.2 MHzLow Quiescent Current: 125 µA per AmplifierHigh Common-Mode Rejection: 110 dBLow Bias Current: 10 pA (typical)Supply Range: 2.7 V to 36 V, ±1.35 V to ±18 VLow Noise: 22 nV/√HzEMI-Hardened with RFI-Filtered InputsInput Range Includes the Negative SupplyUnity-Gain Stable: 200-pF Capacitive LoadRail-to-Rail OutputGain Bandwidth: 1.2 MHzLow Quiescent Current: 125 µA per AmplifierHigh Common-Mode Rejection: 110 dBLow Bias Current: 10 pA (typical)
Description
AI
The TLVx170 family of electromagnetic interference (EMI)-hardened, 36-V, single-supply, low-noise operational amplifiers (op amps) have a THD+N of 0.0002% at 1 kHz and can operate on supplies that range from 2.7 V (±1.35 V) to 36 V (±18V). These features, along with low noise and very high power-supply rejection ratio (PSRR), make the single-channel TLV170, dual-channel TLV2170, and quad-channel TLV4170 suitable for use in microvolt-level signal amplification. The TLVx170 family of devices also gives good offset, drift, and bandwidth with low quiescent current.
Unlike most op amps that are specified at only one supply voltage, the TLVx170 family of op amps is specified from 2.7 V to 36 V with the ability to swing input signals beyond the supply rails without phase reversal. The TLVx170 family is also unity-gain stable with a 200-pF capacitive load with a 1.2-MHz bandwidth and a 0.4-V/µs slew rate for use in current-to-voltage converters.
The device inputs can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation, and with full rail-to-rail input with reduced performance. The TLVx170 devices are specified from –40°C to +125°C.
The TLVx170 family of electromagnetic interference (EMI)-hardened, 36-V, single-supply, low-noise operational amplifiers (op amps) have a THD+N of 0.0002% at 1 kHz and can operate on supplies that range from 2.7 V (±1.35 V) to 36 V (±18V). These features, along with low noise and very high power-supply rejection ratio (PSRR), make the single-channel TLV170, dual-channel TLV2170, and quad-channel TLV4170 suitable for use in microvolt-level signal amplification. The TLVx170 family of devices also gives good offset, drift, and bandwidth with low quiescent current.
Unlike most op amps that are specified at only one supply voltage, the TLVx170 family of op amps is specified from 2.7 V to 36 V with the ability to swing input signals beyond the supply rails without phase reversal. The TLVx170 family is also unity-gain stable with a 200-pF capacitive load with a 1.2-MHz bandwidth and a 0.4-V/µs slew rate for use in current-to-voltage converters.
The device inputs can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation, and with full rail-to-rail input with reduced performance. The TLVx170 devices are specified from –40°C to +125°C.