Catalog(0 parts)
| Part |
|---|
No parts found Try adjusting your search criteria |
Key Features
• Low-Voltage PECL Input and Low-Voltage PECL or LVDS OutputsClock Rates to 2 GHz140-ps Output Transition Times0.11 ps Typical Intrinsic Phase JitterLess than 630 ps Propagation Delay Times2.5-V or 3.3-V Supply Operation2-mm × 2-mm Small-Outline No-Lead PackageAPPLICATIONSPECL-to-LVDS TranslationClock Signal AmplificationLow-Voltage PECL Input and Low-Voltage PECL or LVDS OutputsClock Rates to 2 GHz140-ps Output Transition Times0.11 ps Typical Intrinsic Phase JitterLess than 630 ps Propagation Delay Times2.5-V or 3.3-V Supply Operation2-mm × 2-mm Small-Outline No-Lead PackageAPPLICATIONSPECL-to-LVDS TranslationClock Signal Amplification
Description
AI
These four devices are high-frequency oscillator gain stages supporting both LVPECL or LVDS on the high gain outputs in 3.3-V or 2.5-V systems. Additionally, provides the option of both single-ended input (PECL levels on the SN65LVx16) and fully differential inputs on the SN65LVx17.
The SN65LVx16 provides the user a Gain Control (GC) for controlling theQoutput from 300 mV to 860 mV either by leaving it open (NC), grounded, or tied to VCC. (When left open, theQoutput defaults to 575 mV.) TheQon the SN65LVx17 defaults to 575 mV as well.
Both devices provide a voltage reference (VBB) of typically 1.35 V below VCCfor use in receiving single-ended PECL input signals. When not used, VBBshould be unconnected or open.
All devices are characterized for operation from -40°C to 85°C.
These four devices are high-frequency oscillator gain stages supporting both LVPECL or LVDS on the high gain outputs in 3.3-V or 2.5-V systems. Additionally, provides the option of both single-ended input (PECL levels on the SN65LVx16) and fully differential inputs on the SN65LVx17.
The SN65LVx16 provides the user a Gain Control (GC) for controlling theQoutput from 300 mV to 860 mV either by leaving it open (NC), grounded, or tied to VCC. (When left open, theQoutput defaults to 575 mV.) TheQon the SN65LVx17 defaults to 575 mV as well.
Both devices provide a voltage reference (VBB) of typically 1.35 V below VCCfor use in receiving single-ended PECL input signals. When not used, VBBshould be unconnected or open.
All devices are characterized for operation from -40°C to 85°C.