TPS22910 Series
Manufacturer: Texas Instruments
Beta
⌘K
EVAL MODULE FOR TPS22910A-656
| Part | Supplied Contents | Primary Attributes | Current | Contents | Embedded | Utilized IC / Part | Type | Function | Output Ratio | Input Ratio | Input Type | Mounting Type | Features | Voltage - Load (Max) | Voltage - Load (Min) | Current - Output (Max) | Output Configuration | Package / Case | Switch Type | Output Type | Interface | Voltage - Supply (Vdd/Vcc) | Voltage - Supply (Vcc/Vdd) | Fault Protection | Rds On (Typ) | Package Name | Package Width | Package Length | Number of Outputs | Operating Temperature (Max) | Operating Temperature (Min) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Texas Instruments | Board(s) | Controlled Turn-ON Low rON Single Channel Single Channel 2A Low rON Controlled Turn-ON | 2 A | Board | No | TPS22910A | Power Management | Power Distribution Switch (Load Switch) | |||||||||||||||||||||||
Texas Instruments | 1 | 1 | Non-Inverting | Surface Mount | Slew Rate Controlled | 5.5 V | 1.4 V | 2 A | High Side | 4-XFBGA DSBGA | General Purpose | P-Channel | On/Off | Not Required | Not Required | Reverse Current UVLO | 60 mOhm | 4-DSBGA | 0.88 mm | 0.88 mm | 1 | 85 °C | -40 °C | ||||||||
 Texas Instruments | 1 | 1 | Non-Inverting | Surface Mount | Slew Rate Controlled | 5.5 V | 1.4 V | 2 A | High Side | 4-XFBGA DSBGA | General Purpose | P-Channel | On/Off | Not Required | Not Required | Reverse Current UVLO | 60 mOhm | 4-DSBGA | 0.88 mm | 0.88 mm | 1 | 85 °C | -40 °C |