Zenode.ai Logo
Log InSign Up

75LBC172 Series

Quadruple Low-Power Differential Line Driver

Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/

Catalog

Quadruple Low-Power Differential Line Driver

PartData RateOperating Temperature [Max]Operating Temperature [Min]Supplier Device PackagePackage / CaseVoltage - Supply [Min]Voltage - Supply [Max]Number of Drivers/Receivers [custom]Number of Drivers/Receivers [custom]ProtocolMounting TypeTypePackage / Case
Texas Instruments
SN75LBC172A16DWR
30 Mbps
70 ░C
0 °C
16-SOIC
16-SOIC
4.75 V
5.25 V
0
4
RS422, RS485
Surface Mount
Driver
Texas Instruments
SN75LBC172ADW
30 Mbps
70 ░C
0 °C
20-SOIC
20-SOIC
4.75 V
5.25 V
0
4
RS422, RS485
Surface Mount
Driver
0.295 in, 7.5 mm
Texas Instruments
SN75LBC172N
70 ░C
0 °C
16-PDIP
16-DIP
4.75 V
5.25 V
0
4
RS422, RS485
Through Hole
Driver
0.3 in, 7.62 mm
Texas Instruments
SN75LBC172DWR
70 ░C
0 °C
20-SOIC
20-SOIC
4.75 V
5.25 V
0
4
RS422, RS485
Surface Mount
Driver
0.295 in, 7.5 mm
Texas Instruments
SN75LBC172AN
30 Mbps
70 ░C
0 °C
16-PDIP
16-DIP
4.75 V
5.25 V
0
4
RS422, RS485
Through Hole
Driver
0.3 in, 7.62 mm
Texas Instruments
SN75LBC172A16DWRG4
30 Mbps
70 ░C
0 °C
16-SOIC
16-SOIC
4.75 V
5.25 V
0
4
RS422, RS485
Surface Mount
Driver
Texas Instruments
SN75LBC172ADWR
30 Mbps
70 ░C
0 °C
20-SOIC
20-SOIC
4.75 V
5.25 V
0
4
RS422, RS485
Surface Mount
Driver
0.295 in, 7.5 mm

Key Features

• Exceeds or meets EIA standard RS-485Designed for high-speed multipoint transmission on long bus lines in noisy environmentsSupports data rates up to and exceeding ten million transfers per secondProvides a common-mode output voltage range of −7V to 12VOffers positive-and negative-current limitingConsumes low power to 1.5mA max (output disabled)Functions interchangeably with the SN75172Exceeds or meets EIA standard RS-485Designed for high-speed multipoint transmission on long bus lines in noisy environmentsSupports data rates up to and exceeding ten million transfers per secondProvides a common-mode output voltage range of −7V to 12VOffers positive-and negative-current limitingConsumes low power to 1.5mA max (output disabled)Functions interchangeably with the SN75172

Description

AI
The SN65LBC172 and SN75LBC172 are monolithic quadruple differential line drivers with three-state outputs. Both devices are designed to meet the requirements of EIA Standard RS-485. These devices are optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. Each driver features wide positive and negative common- mode output voltage ranges, current limiting, and thermal-shutdown circuitry which provides a party-line application in noisy environments. Both devices are designed using LinBiCMOS™, facilitating ultra-low power consumption and inherent robustness. Both the SN65LBC172 and SN75LBC172 provide positive- and negative-current limiting and thermal shutdown for protection from line fault conditions on the transmission bus line. These devices offer optimum performance when used with the SN75LBC173 or SN75LBC175 quadruple line receivers. The SN65LBC172 and SN75LBC172 are available in the 16-pin DIP package (N) and the 20-pin wide-body small-outline inline-circuit (SOIC) package (DW). The SN75LBC172 is characterized for operation over the commercial temperature range of 0°C to 70°C. The SN65LBC172 is characterized over the industrial temperature range of −40°C to 85°C. The SN65LBC172 and SN75LBC172 are monolithic quadruple differential line drivers with three-state outputs. Both devices are designed to meet the requirements of EIA Standard RS-485. These devices are optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. Each driver features wide positive and negative common- mode output voltage ranges, current limiting, and thermal-shutdown circuitry which provides a party-line application in noisy environments. Both devices are designed using LinBiCMOS™, facilitating ultra-low power consumption and inherent robustness. Both the SN65LBC172 and SN75LBC172 provide positive- and negative-current limiting and thermal shutdown for protection from line fault conditions on the transmission bus line. These devices offer optimum performance when used with the SN75LBC173 or SN75LBC175 quadruple line receivers. The SN65LBC172 and SN75LBC172 are available in the 16-pin DIP package (N) and the 20-pin wide-body small-outline inline-circuit (SOIC) package (DW). The SN75LBC172 is characterized for operation over the commercial temperature range of 0°C to 70°C. The SN65LBC172 is characterized over the industrial temperature range of −40°C to 85°C.