TLIN1029 Series

Local interconnect network (LIN) transceiver with dominant state timeout

Link to Manufacturer Page: https://www.ti.com/

Catalog

Local interconnect network (LIN) transceiver with dominant state timeout

Part	Receiver Hysteresis	Operating Temperature [Min]	Operating Temperature [Max]	Protocol	Grade	Qualification	Mounting Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Type	Supplier Device Package	Data Rate	Package / Case	Package / Case	Duplex
Texas Instruments TLIN1029DQ1	200 mV	-40 °C	125 °C	LINbus	Automotive	AEC-Q100	Surface Mount	4 V	36 VDC	Transceiver	8-SOIC	20 kbps	3.9 mm	8-SOIC
Texas Instruments TLIN1029DRBTQ1	200 mV	-40 °C	125 °C	LIN	Automotive	AEC-Q100	Surface Mount, Wettable Flank	4 V	36 VDC	Transceiver	8-VSON (3x3)	20 kbps		8-VDFN Exposed Pad
Texas Instruments TLIN1029ADRBRQ1	200 mV	-40 °C	125 °C	LIN			Surface Mount, Wettable Flank	4 V	36 VDC	Transceiver	8-SON (3x3)	100 Kbps		8-VDFN Exposed Pad	Half
Texas Instruments TLIN1029DRBRQ1	200 mV	-40 °C	125 °C	LIN	Automotive	AEC-Q100	Surface Mount, Wettable Flank	4 V	36 VDC	Transceiver	8-VSON (3x3)	20 kbps		8-VDFN Exposed Pad
Texas Instruments TLIN1029MDRBRQ1	200 mV	-40 °C	125 °C	LIN	Automotive	AEC-Q100	Surface Mount, Wettable Flank	4 V	36 VDC	Transceiver	8-VSON (3x3)	20 kbps		8-VDFN Exposed Pad
Texas Instruments TLIN1029DRQ1	200 mV	-40 °C	125 °C	LINbus	Automotive	AEC-Q100	Surface Mount	4 V	36 VDC	Transceiver	8-SOIC	20 kbps	3.9 mm	8-SOIC

Key Features

• AEC-Q100 Qualified for automotive applicationsTemperature grade 1: –40°C to 125°C TADevice HBM certification level: ±8 kVDevice CDM certification level: ±1.5 kVCompatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 (SeeSLLA490)Conforms to SAE J2602 recommended practice for LIN (SeeSLLA490)Supports ISO 9141 (K-Line)Supports 12 V applicationsLIN transmit data rate up to 20-kbpsWide operating ranges4-V to 36-V Supply voltage±45-V LIN bus fault protectionSleep mode: ultra-low current consumption allows wake-up event from:LIN busLocal wake up through ENPower up and down glitch free operationProtection features:Under voltage protection on VSUPTXD Dominant time out protection (DTO)Thermal shutdown protectionUnpowered node or ground disconnection failsafe at system level.Available in SOIC (8) and leadless VSON (8) packages for improved automated optical inspection (AOI) capabilityAEC-Q100 Qualified for automotive applicationsTemperature grade 1: –40°C to 125°C TADevice HBM certification level: ±8 kVDevice CDM certification level: ±1.5 kVCompatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 (SeeSLLA490)Conforms to SAE J2602 recommended practice for LIN (SeeSLLA490)Supports ISO 9141 (K-Line)Supports 12 V applicationsLIN transmit data rate up to 20-kbpsWide operating ranges4-V to 36-V Supply voltage±45-V LIN bus fault protectionSleep mode: ultra-low current consumption allows wake-up event from:LIN busLocal wake up through ENPower up and down glitch free operationProtection features:Under voltage protection on VSUPTXD Dominant time out protection (DTO)Thermal shutdown protectionUnpowered node or ground disconnection failsafe at system level.Available in SOIC (8) and leadless VSON (8) packages for improved automated optical inspection (AOI) capability

Description

The TLIN1029-Q1 is a local interconnect network (LIN) physical layer transceiver with integrated wake-up and protection features, compatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 standards. LIN is a single-wire bidirectional bus typically used for in-vehicle networks using data rates up to 20 kbps. The TLIN1029-Q1 is designed to support 12-V applications with wider operating voltage and additional bus-fault protection. The LIN receiver supports data rates up to 100 kbps for faster in-line programming. The TLIN1029-Q1 converts the data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or EN pin. The TLIN1029-Q1 is a local interconnect network (LIN) physical layer transceiver with integrated wake-up and protection features, compatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 standards. LIN is a single-wire bidirectional bus typically used for in-vehicle networks using data rates up to 20 kbps. The TLIN1029-Q1 is designed to support 12-V applications with wider operating voltage and additional bus-fault protection. The LIN receiver supports data rates up to 100 kbps for faster in-line programming. The TLIN1029-Q1 converts the data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or EN pin.