TLIN2029 Series
Fault Protected Local Interconnect Network (LIN) Transceiver With Dominant State Timeout
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Fault Protected Local Interconnect Network (LIN) Transceiver With Dominant State Timeout
| Part | Supplier Device Package | Operating Temperature [Min] | Operating Temperature [Max] | Protocol | Grade | Mounting Type | Type | Receiver Hysteresis | Data Rate | Package / Case | Voltage - Supply [Max] | Voltage - Supply [Min] | Qualification | Package / Case | Duplex | Function | Utilized IC / Part | Supplied Contents |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TLIN2029DRBTQ1 | 8-VSON (3x3) | -40 °C | 125 °C | LIN | Automotive | Surface Mount, Wettable Flank | Transceiver | 200 mV | 20 kbps | 8-VDFN Exposed Pad | 48 VDC | 4 V | AEC-Q100 | |||||
Texas Instruments TLIN2029DRBRQ1 | 8-VSON (3x3) | -40 °C | 125 °C | LIN | Automotive | Surface Mount, Wettable Flank | Transceiver | 200 mV | 20 kbps | 8-VDFN Exposed Pad | 48 VDC | 4 V | AEC-Q100 | |||||
Texas Instruments TLIN2029DQ1 | 8-SOIC | -40 °C | 125 °C | LIN | Automotive | Surface Mount | Transceiver | 200 mV | 20 kbps | 8-SOIC | 48 VDC | 4 V | AEC-Q100 | 3.9 mm | Half | |||
Texas Instruments TLIN2029EVM | Interface | LIN | TLIN2029-Q1 | Board(s) | ||||||||||||||
Texas Instruments TLIN2029DRQ1 | 8-SOIC | -40 °C | 125 °C | LIN | Automotive | Surface Mount | Transceiver | 200 mV | 20 kbps | 8-SOIC | 48 VDC | 4 V | AEC-Q100 | 3.9 mm |
Key Features
• AEC-Q100 Qualified for automotive applicationsTemperature grade 1: –40°C to 125°C TADevice HBM certification level: ±8kVDevice CDM certification level: ±1.5kVCompatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 (SeeSLLA490)Conforms to SAE J2602 recommended practice for LIN (SeeSLLA490)Supports ISO 9141 (K-line)Supports 12V applicationsLIN transmit data rate up to 20kbpsWide operating ranges4V to 36V Supply voltage±45V LIN bus fault protectionSleep mode: ultra-low current consumption allows wake-up event from:LIN busLocal wake up through ENPower up and down glitch free operationProtection features:Under voltage protection on VSUPTXD Dominant time out protection (DTO)Thermal shutdown protectionUnpowered node or ground disconnection failsafe at system level.Available in SOIC (8) and leadless VSON (8) packages for improved automated optical inspection (AOI) capabilityAEC-Q100 Qualified for automotive applicationsTemperature grade 1: –40°C to 125°C TADevice HBM certification level: ±8kVDevice CDM certification level: ±1.5kVCompatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 (SeeSLLA490)Conforms to SAE J2602 recommended practice for LIN (SeeSLLA490)Supports ISO 9141 (K-line)Supports 12V applicationsLIN transmit data rate up to 20kbpsWide operating ranges4V to 36V Supply voltage±45V LIN bus fault protectionSleep mode: ultra-low current consumption allows wake-up event from:LIN busLocal wake up through ENPower up and down glitch free operationProtection features:Under voltage protection on VSUPTXD Dominant time out protection (DTO)Thermal shutdown protectionUnpowered node or ground disconnection failsafe at system level.Available in SOIC (8) and leadless VSON (8) packages for improved automated optical inspection (AOI) capability
Description
AI
The TLIN2029-Q1 is a local interconnect network (LIN) physical layer transceiver with integrated wake-up and protection features, compatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 standards. LIN is a single-wire bidirectional bus typically used for in-vehicle networks using data rates up to 20kbps. The TLIN2029-Q1 is designed to support 12V applications with wider operating voltage and additional bus-fault protection.
The LIN receiver supports data rates up to 100kbps for faster in-line programming. The TLIN2029-Q1 converts the data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or EN pin.
The integrated resistor, electrostatic discharge (ESD) and fault protection allows designers to save board space in their applications.
The TLIN2029-Q1 is a local interconnect network (LIN) physical layer transceiver with integrated wake-up and protection features, compatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 standards. LIN is a single-wire bidirectional bus typically used for in-vehicle networks using data rates up to 20kbps. The TLIN2029-Q1 is designed to support 12V applications with wider operating voltage and additional bus-fault protection.
The LIN receiver supports data rates up to 100kbps for faster in-line programming. The TLIN2029-Q1 converts the data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or EN pin.
The integrated resistor, electrostatic discharge (ESD) and fault protection allows designers to save board space in their applications.