Zenode.ai Logo

CD74ACT158 Series

Quad Inverting 2-Input Multiplexers

Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/

Catalog

Quad Inverting 2-Input Multiplexers

PartMounting TypePackage / CasePackage / CaseSupplier Device PackageOperating Temperature [Min]Operating Temperature [Max]Independent CircuitsVoltage - Supply [Max]Voltage - Supply [Min]Current - Output High, Low [custom]Current - Output High, Low [custom]Circuit [custom]Circuit [custom]Voltage Supply SourceType
Texas Instruments
CD74ACT158M96
Surface Mount
16-SOIC
0.154 in, 3.9 mm Width
16-SOIC
-55 °C
125 °C
1
5.5 V
4.5 V
24 mA
24 mA
4
2:1
Single Supply
Multiplexer

Key Features

Inputs Are TTL-Voltage CompatibleSpeed of Bipolar F, AS, and S, With Significantly Reduced Power ConsumptionBalanced Propagation Delays±24-mA Output Drive CurrentFanout to 15 F DevicesSCR-Latchup-Resistant CMOS Process and Circuit DesignExceeds 2-kV ESD Protection Per MIL-STD-883, Method 3015Inputs Are TTL-Voltage CompatibleSpeed of Bipolar F, AS, and S, With Significantly Reduced Power ConsumptionBalanced Propagation Delays±24-mA Output Drive CurrentFanout to 15 F DevicesSCR-Latchup-Resistant CMOS Process and Circuit DesignExceeds 2-kV ESD Protection Per MIL-STD-883, Method 3015

Description

AI
This quadruple 2-line to 1-line data selector/multiplexer is designed for 4.5-V to 5.5-V VCCoperation. The CD74ACT158 features a common strobe (G)\ input. When the strobe is high, all outputs are high. When the strobe is low, a 4-bit word is selected from one of two sources and is routed to the four outputs. This device provides inverted data. This quadruple 2-line to 1-line data selector/multiplexer is designed for 4.5-V to 5.5-V VCCoperation. The CD74ACT158 features a common strobe (G)\ input. When the strobe is high, all outputs are high. When the strobe is low, a 4-bit word is selected from one of two sources and is routed to the four outputs. This device provides inverted data.