MSP430G2553 Series
Automotive 16-MHz MCU with 16-kb Flash, 512B SRAM, 10-bit ADC, comparator, UART/SPI/I2C, timer
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Automotive 16-MHz MCU with 16-kb Flash, 512B SRAM, 10-bit ADC, comparator, UART/SPI/I2C, timer
| Part | Oscillator Type | Supplier Device Package | Core Processor | Program Memory Size | Number of I/O | Program Memory Type | Mounting Type | Data Converters [custom] | Data Converters [custom] | Package / Case | RAM Size [custom] | RAM Size [custom] | Core Size | Connectivity | Peripherals | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Speed | Operating Temperature [Max] | Operating Temperature [Min] | Grade | Number of I/O [custom] | Package / Case | Package / Case | Qualification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments MSP430G2553IRHB32T | Internal | 32-VQFN (5x5) | MSP430 CPU16 | 16 KB | 24 | FLASH | Surface Mount | 8 | 10 b | 32-VFQFN Exposed Pad | 8 | 512 | 16-Bit | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Brown-out Detect/Reset, DMA, POR, PWM, WDT | 3.6 V | 1.8 V | 16 MHz | 85 °C | -40 °C | |||||
Texas Instruments MSP430G2553IPW0RQ1 | Internal | 20-TSSOP | MSP430 CPU16 | 16 KB | FLASH | Surface Mount | 8 | 10 b | 20-TSSOP | 8 | 512 | 16-Bit | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Brown-out Detect/Reset, DMA, POR, PWM, WDT | 3.6 V | 1.8 V | 16 MHz | 85 °C | -40 °C | Automotive | 16 | 0.173 in | 4.4 mm | AEC-Q100 | |
Texas Instruments MSP430G2553IPW28R | Internal | 28-TSSOP | MSP430 CPU16 | 16 KB | 24 | FLASH | Surface Mount | 8 | 10 b | 28-TSSOP | 8 | 512 | 16-Bit | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Brown-out Detect/Reset, DMA, POR, PWM, WDT | 3.6 V | 1.8 V | 16 MHz | 85 °C | -40 °C | 0.173 in | 4.4 mm | |||
Texas Instruments MSP430G2553IPW20 | Internal | 20-TSSOP | MSP430 CPU16 | 16 KB | FLASH | Surface Mount | 8 | 10 b | 20-TSSOP | 8 | 512 | 16-Bit | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Brown-out Detect/Reset, DMA, POR, PWM, WDT | 3.6 V | 1.8 V | 16 MHz | 85 °C | -40 °C | 16 | 0.173 in | 4.4 mm | |||
Texas Instruments MSP430G2553IPW8RQ1 | Internal | 28-TSSOP | MSP430 CPU16 | 16 KB | 24 | FLASH | Surface Mount | 8 | 10 b | 28-TSSOP | 8 | 512 | 16-Bit | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Brown-out Detect/Reset, DMA, POR, PWM, WDT | 3.6 V | 1.8 V | 16 MHz | 85 °C | -40 °C | Automotive | 0.173 in | 4.4 mm | AEC-Q100 | |
Texas Instruments MSP430G2553CY | Internal | Diesale | MSP430 CPU16 | 16 KB | FLASH | Surface Mount | 8 | 10 b | Die | 8 | 512 | 16-Bit | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Brown-out Detect/Reset, DMA, POR, PWM, WDT | 3.6 V | 1.8 V | 16 MHz | 16 | |||||||
Texas Instruments MSP430G2553IPW20R | Internal | 20-TSSOP | MSP430 CPU16 | 16 KB | FLASH | Surface Mount | 8 | 10 b | 20-TSSOP | 8 | 512 | 16-Bit | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Brown-out Detect/Reset, DMA, POR, PWM, WDT | 3.6 V | 1.8 V | 16 MHz | 85 °C | -40 °C | 16 | 0.173 in | 4.4 mm | |||
Texas Instruments MSP430G2553IRHB32R | Internal | 32-VQFN (5x5) | MSP430 CPU16 | 16 KB | 24 | FLASH | Surface Mount | 8 | 10 b | 32-VFQFN Exposed Pad | 8 | 512 | 16-Bit | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Brown-out Detect/Reset, DMA, POR, PWM, WDT | 3.6 V | 1.8 V | 16 MHz | 85 °C | -40 °C |
Key Features
• Qualified for Automotive ApplicationsLow Supply-Voltage Range: 1.8 V to 3.6 VUltra-Low-Power ConsumptionActive Mode: 230 µA at 1 MHz, 2.2 VStandby Mode: 0.5 µAOff Mode (RAM Retention): 0.1 µAFive Power-Saving ModesUltra-Fast Wakeup From Standby Mode in Less Than 1 µs16-Bit RISC Architecture, 62.5-ns Instruction Cycle TimeBasic Clock Module ConfigurationsInternal Frequencies up to 16 MHz With Four Calibrated FrequencyInternal Very-Low-Power Low-Frequency (LF) Oscillator32-kHz CrystalExternal Digital Clock SourceTwo 16-Bit Timer_A With Three Capture/Compare RegistersUp to 24 Capacitive-Touch Enabled I/O PinsUniversal Serial Communication Interface (USCI)Enhanced UART Supports Automatic Baud-Rate Detection (LIN)IrDA Encoder and DecoderSynchronous SPII2COn-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion10-Bit 200-ksps Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and AutoscanBrownout DetectorSerial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security FuseOn-Chip Emulation Logic With Spy-Bi-Wire InterfacePackage OptionsTSSOP: 20 Pin or 28 PinQualified for Automotive ApplicationsLow Supply-Voltage Range: 1.8 V to 3.6 VUltra-Low-Power ConsumptionActive Mode: 230 µA at 1 MHz, 2.2 VStandby Mode: 0.5 µAOff Mode (RAM Retention): 0.1 µAFive Power-Saving ModesUltra-Fast Wakeup From Standby Mode in Less Than 1 µs16-Bit RISC Architecture, 62.5-ns Instruction Cycle TimeBasic Clock Module ConfigurationsInternal Frequencies up to 16 MHz With Four Calibrated FrequencyInternal Very-Low-Power Low-Frequency (LF) Oscillator32-kHz CrystalExternal Digital Clock SourceTwo 16-Bit Timer_A With Three Capture/Compare RegistersUp to 24 Capacitive-Touch Enabled I/O PinsUniversal Serial Communication Interface (USCI)Enhanced UART Supports Automatic Baud-Rate Detection (LIN)IrDA Encoder and DecoderSynchronous SPII2COn-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion10-Bit 200-ksps Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and AutoscanBrownout DetectorSerial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security FuseOn-Chip Emulation Logic With Spy-Bi-Wire InterfacePackage OptionsTSSOP: 20 Pin or 28 Pin
Description
AI
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 1 µs.
The MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, a 10-bit analog-to-digital (A/D) converter, and built-in communication capability using the universal serial communication interface.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 1 µs.
The MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, a 10-bit analog-to-digital (A/D) converter, and built-in communication capability using the universal serial communication interface.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.