Zenode.ai Logo

TLV2541 Series

12-Bit, 200 kSPS ADC, Serial Out, TMS320 Compatible (up to 10MHz), Single Ch.

Manufacturer: Texas Instruments

Catalog(4 parts)

PartSampling Rate (Per Second)Operating TemperatureOperating TemperatureVoltage - Supply, AnalogVoltage - Supply, AnalogInput TypePackage / CasePackage / CasePackage / CaseData InterfaceMounting TypeNumber of A/D ConvertersNumber of BitsReference TypeConfigurationArchitectureVoltage - Supply, DigitalVoltage - Supply, DigitalNumber of InputsRatio - S/H:ADCSupplier Device Package
Texas Instruments
TLV2541IDGK
12 Bit Analog to Digital Converter 1 Input 1 SAR 8-VSSOP
200k
-40 °C
85 °C
5.5 V
2.700000047683716 V
Single Ended
8-MSOP, 8-TSSOP
0.0029972000047564507 m
0.003000000026077032 m
SPI
Surface Mount
1 ul
12 ul
External
S/H-ADC
SAR
5.5 V
2.700000047683716 V
1 ul
1:1
Texas Instruments
TLV2541CDGK
12 Bit Analog to Digital Converter 1 Input 1 SAR 8-VSSOP
200k
0 °C
70 °C
5.5 V
2.700000047683716 V
Single Ended
8-MSOP, 8-TSSOP
0.0029972000047564507 m
0.003000000026077032 m
SPI
Surface Mount
1 ul
12 ul
External
S/H-ADC
SAR
5.5 V
2.700000047683716 V
1 ul
1:1
Texas Instruments
TLV2541ID
12 Bit Analog to Digital Converter 1 Input 1 SAR 8-SOIC
200k
-40 °C
85 °C
5.5 V
2.700000047683716 V
Single Ended
8-SOIC
0.003899999894201755 m
SPI
Surface Mount
1 ul
12 ul
External
S/H-ADC
SAR
5.5 V
2.700000047683716 V
1 ul
1:1
8-SOIC
Texas Instruments
TLV2541IDGKR
12 Bit Analog to Digital Converter 1 Input 1 SAR 8-VSSOP
200k
-40 °C
85 °C
5.5 V
2.700000047683716 V
Single Ended
8-MSOP, 8-TSSOP
0.0029972000047564507 m
0.003000000026077032 m
SPI
Surface Mount
1 ul
12 ul
External
S/H-ADC
SAR
5.5 V
2.700000047683716 V
1 ul
1:1

Key Features

Maximum Throughput . . . 140/200 KSPSBuilt-In Conversion ClockINL/DNL: ±1 LSB Max, SINAD: 72 dB,SFDR: 85 dB, fi= 20 kHzSPI/DSP-Compatible Serial InterfaceSingle Supply: 2.7 Vdc to 5.5 VdcRail-to-Rail Analog Input With 500 kHz BWThree Options Available:TLV2541: Single Channel InputTLV2542: Dual Channels With AutosweepTLV2545: Single Channel With Pseudo-Differential InputLow Power With Autopower DownOperating Current: 1 mA at 2.7 V, 1.5 mA at 5 VAutopower Down: 2 µA at 2.7 V, 5 µA at 5 VSmall 8-Pin MSOP and SOIC PackagesTMS320 is a trademark of Texas Instruments.Maximum Throughput . . . 140/200 KSPSBuilt-In Conversion ClockINL/DNL: ±1 LSB Max, SINAD: 72 dB,SFDR: 85 dB, fi= 20 kHzSPI/DSP-Compatible Serial InterfaceSingle Supply: 2.7 Vdc to 5.5 VdcRail-to-Rail Analog Input With 500 kHz BWThree Options Available:TLV2541: Single Channel InputTLV2542: Dual Channels With AutosweepTLV2545: Single Channel With Pseudo-Differential InputLow Power With Autopower DownOperating Current: 1 mA at 2.7 V, 1.5 mA at 5 VAutopower Down: 2 µA at 2.7 V, 5 µA at 5 VSmall 8-Pin MSOP and SOIC PackagesTMS320 is a trademark of Texas Instruments.

Description

AI
The TLV2541, TLV2542, and TLV2545 are a family of high performance, 12-bit, low power, miniature, CMOS analog-to-digital converters (ADC). The TLV254x family operates from a single 2.7-V to 5.5-V supply. Devices are available with single, dual, or single pseudo-differential inputs. Each device has a chip select (CS), serial clock (SCLK), and serial data output (SDO) that provides a direct 3-wire interface to the serial port of most popular host microprocessors (SPI interface). When interfaced with a TMS320™ DSP, a frame sync signal (FS) can be used to indicate the start of a serial data frame onCSfor all devices or FS for the TLV2541. TLV2541, TLV2542, and TLV2545 are designed to operate with very low power consumption. The power saving feature is further enhanced with an autopower-down mode. This product family features a high-speed serial link to modern host processors with SCLK up to 20 MHz. The maximum SCLK frequency is dependent upon the mode of operation (see Table 1). The TLV254x family uses the built-in oscillator as the conversion clock, providing a 3.5-µs conversion time. The TLV2541, TLV2542, and TLV2545 are a family of high performance, 12-bit, low power, miniature, CMOS analog-to-digital converters (ADC). The TLV254x family operates from a single 2.7-V to 5.5-V supply. Devices are available with single, dual, or single pseudo-differential inputs. Each device has a chip select (CS), serial clock (SCLK), and serial data output (SDO) that provides a direct 3-wire interface to the serial port of most popular host microprocessors (SPI interface). When interfaced with a TMS320™ DSP, a frame sync signal (FS) can be used to indicate the start of a serial data frame onCSfor all devices or FS for the TLV2541. TLV2541, TLV2542, and TLV2545 are designed to operate with very low power consumption. The power saving feature is further enhanced with an autopower-down mode. This product family features a high-speed serial link to modern host processors with SCLK up to 20 MHz. The maximum SCLK frequency is dependent upon the mode of operation (see Table 1). The TLV254x family uses the built-in oscillator as the conversion clock, providing a 3.5-µs conversion time.