TPS650830 Series
Programmable mid-input voltage range Power Management IC (PMIC) for Skylake processors
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Applications | Voltage - Input▲▼ | Voltage - Input▲▼ | Supplier Device Package | Mounting Type | Voltage - Output | Operating Temperature▲▼ | Operating Temperature▲▼ | Number of Outputs▲▼ | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|
Converter, Mobile PCs | 24 V | 5.400000095367432 V | 168-NFBGA (7x7) | Surface Mount | Multiple | -40 °C | 85 °C | 8 ul | 168-TFBGA |
Key Features
• 5 Reconfigurable Voltage Regulators:High Efficiency over a Wide Input Voltage andWide Output Current RangeVoltage, Current, and Sequence can beChanged to Optimize the System4 Variable Output Voltage Step-DownControllers using External Power MOSFETs:VR1 = 1 V; VR3 = 3.3 V, VR4 = 1.2 V/1.35V/1.1 V for DDRx VDDQ , VR5 = 5 VVINRange from 5.4 V to 24 V1 Variable Output Voltage Step-Down Converterwith Internal Power MOSFETs:VR2 = 1.8 VVINRange from 3 V to 3.6 VUp to 2 A of Continuous Output CurrentOutput Voltage DC Accuracy ±1%; withDifferential Output Voltage SensingUltra Low Quiescent Current Mode, Typical 30-µA Quiescent Current per Controller orConverter3 Fixed LDO Voltage Regulators:LDO1: Fixed Output Voltage LDO for DDRx VTT(Vout = VDDQ/2)Up to 1 A of Continuous Output Current,DC+AC Accuracy ±5%, 2 A PeakLDO3: 3.3-V Fixed Output Voltage LDO, DCAccuracy ±1%, < 40 mAHigh Precision Reference Supply forExternal ADC3.3-V Load Switch for EC_VCC RailLDO5: 5-V Fixed Output Voltage LDO, DCAccuracy ±1%, < 100 mAAutomatic Switch to 5-V Regulator for HigherEfficiency7 Powergood Comparators and Sequence Logicfor External Voltage Regulators, Load Switches,or LDOsPower-Button Logic Supported with ProgrammableResponse Time3 General Purpose Level ShiftersBackup Battery / 3.1-V LDO Selector Output forRTCPower Source Detection and Monitoring: Adapter,Battery1, Battery2Board Temperature Monitoring1-Hz EC-Wake Clock OutputAdvanced System Reset ControlI2C Interface: Standard-Mode (100 kHz), Fast-Mode (400 kHz), Fast-Mode Plus (1000 kHz)5 Reconfigurable Voltage Regulators:High Efficiency over a Wide Input Voltage andWide Output Current RangeVoltage, Current, and Sequence can beChanged to Optimize the System4 Variable Output Voltage Step-DownControllers using External Power MOSFETs:VR1 = 1 V; VR3 = 3.3 V, VR4 = 1.2 V/1.35V/1.1 V for DDRx VDDQ , VR5 = 5 VVINRange from 5.4 V to 24 V1 Variable Output Voltage Step-Down Converterwith Internal Power MOSFETs:VR2 = 1.8 VVINRange from 3 V to 3.6 VUp to 2 A of Continuous Output CurrentOutput Voltage DC Accuracy ±1%; withDifferential Output Voltage SensingUltra Low Quiescent Current Mode, Typical 30-µA Quiescent Current per Controller orConverter3 Fixed LDO Voltage Regulators:LDO1: Fixed Output Voltage LDO for DDRx VTT(Vout = VDDQ/2)Up to 1 A of Continuous Output Current,DC+AC Accuracy ±5%, 2 A PeakLDO3: 3.3-V Fixed Output Voltage LDO, DCAccuracy ±1%, < 40 mAHigh Precision Reference Supply forExternal ADC3.3-V Load Switch for EC_VCC RailLDO5: 5-V Fixed Output Voltage LDO, DCAccuracy ±1%, < 100 mAAutomatic Switch to 5-V Regulator for HigherEfficiency7 Powergood Comparators and Sequence Logicfor External Voltage Regulators, Load Switches,or LDOsPower-Button Logic Supported with ProgrammableResponse Time3 General Purpose Level ShiftersBackup Battery / 3.1-V LDO Selector Output forRTCPower Source Detection and Monitoring: Adapter,Battery1, Battery2Board Temperature Monitoring1-Hz EC-Wake Clock OutputAdvanced System Reset ControlI2C Interface: Standard-Mode (100 kHz), Fast-Mode (400 kHz), Fast-Mode Plus (1000 kHz)
Description
AI
The TPS650830 is a single-chip solution Power Management IC designed specifically for the latest Intel Processors targeted for Tablets, Ultrabooks, and Notebooks with NVDC or non-NVDC power architectures, using 2S, 3S, or 4S Lithium-Ion battery packs.
The TPS650830 is used for Volume systems with the low voltage rails merged for the smallest footprint and lowest cost system power solution.
The TPS650830 can provide the complete power solution based on the Intel Reference Designs. Five highly efficient step-down voltage regulators (VRs) and a sink/source LDO, are used along with power-up sequence logic managing external load switches to provide the proper power rails, sequencing, and protection - including DDR3 and DDR4 memory power. The regulators support dynamic voltage scaling (DVS) for maximum efficiency including Connected Standby. The high frequency voltage regulators use small inductors and capacitors to achieve a small solution size. Output power is adjustable on four VR controllers. An I2C interface allows simple control by the embedded controller (EC). Each version is available in a 7x7 NFBGA package and a 9x9 NFBGA package. The 7x7 NFBGA package can be used in Type 4 PCB boards for the smallest area implementation. The 9x9 NFBGA package can be used in Type 3 and Type 4 PCB boards allowing to minimize cost and area.
For the Skylake and Kabylake Power Map implementation, the five PMIC voltage regulators and LDO1 are assigned with the low-voltage rails merged or split according to the configuration. For the Volume (merged low voltage rails) configuration six external load switches are controlled and monitored by using six powergood comparator logic blocs.
The TPS650830 is a single-chip solution Power Management IC designed specifically for the latest Intel Processors targeted for Tablets, Ultrabooks, and Notebooks with NVDC or non-NVDC power architectures, using 2S, 3S, or 4S Lithium-Ion battery packs.
The TPS650830 is used for Volume systems with the low voltage rails merged for the smallest footprint and lowest cost system power solution.
The TPS650830 can provide the complete power solution based on the Intel Reference Designs. Five highly efficient step-down voltage regulators (VRs) and a sink/source LDO, are used along with power-up sequence logic managing external load switches to provide the proper power rails, sequencing, and protection - including DDR3 and DDR4 memory power. The regulators support dynamic voltage scaling (DVS) for maximum efficiency including Connected Standby. The high frequency voltage regulators use small inductors and capacitors to achieve a small solution size. Output power is adjustable on four VR controllers. An I2C interface allows simple control by the embedded controller (EC). Each version is available in a 7x7 NFBGA package and a 9x9 NFBGA package. The 7x7 NFBGA package can be used in Type 4 PCB boards for the smallest area implementation. The 9x9 NFBGA package can be used in Type 3 and Type 4 PCB boards allowing to minimize cost and area.
For the Skylake and Kabylake Power Map implementation, the five PMIC voltage regulators and LDO1 are assigned with the low-voltage rails merged or split according to the configuration. For the Volume (merged low voltage rails) configuration six external load switches are controlled and monitored by using six powergood comparator logic blocs.