ADCV08832 Series
Low Voltage, 8-Bit Serial I/O CMOS A/D Converter With Sample/Hold
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Low Voltage, 8-Bit Serial I/O CMOS A/D Converter With Sample/Hold
| Part | Voltage - Supply, Digital [Max] | Voltage - Supply, Digital [Min] | Mounting Type | Operating Temperature [Max] | Operating Temperature [Min] | Number of A/D Converters | Sampling Rate (Per Second) | Ratio - S/H:ADC | Number of Inputs | Voltage - Supply, Analog [Min] | Voltage - Supply, Analog [Max] | Input Type | Package / Case | Package / Case | Number of Bits | Data Interface | Configuration | Reference Type | Architecture | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments ADCV08832CIMX/NOPB | 5.25 V | 2.7 V | Surface Mount | 125 °C | -40 °C | 1 | 38k | 1:1 | 2 | 2.7 V | 5.25 V | Differential, Pseudo-Differential, Single Ended | 3.9 mm | 8-SOIC | 8 | SPI | S/H-ADC | Supply | SAR | 8-SOIC |
Key Features
• 3-wire serial digital data link requires few I/O pinsSingle supply 2.7V to 5VAnalog input track/hold functionAnalog input voltage range from GND to VCCNo zero or full scale adjustment requiredTTL/CMOS input/output compatibleSuperior pin compatible replacement for TLV0832 and ADC08323-wire serial digital data link requires few I/O pinsSingle supply 2.7V to 5VAnalog input track/hold functionAnalog input voltage range from GND to VCCNo zero or full scale adjustment requiredTTL/CMOS input/output compatibleSuperior pin compatible replacement for TLV0832 and ADC0832
Description
AI
The ADCV08832 is a low voltage, 8-Bit successive approximation analog-to-digital converter with a 3-wire serial interface. The serial I/O will interface to microcontrollers, PLD's, microprocessors, DSPs or shift registers. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data exchange standard.
To minimize total power consumption, the ADCV08832 can be set to go into low power mode whenever it is not performing conversions.
A sample/hold function allows the analog voltage at the positive input to vary during the actual A/D conversion. The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes.
The ADCV08832 is a low voltage, 8-Bit successive approximation analog-to-digital converter with a 3-wire serial interface. The serial I/O will interface to microcontrollers, PLD's, microprocessors, DSPs or shift registers. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data exchange standard.
To minimize total power consumption, the ADCV08832 can be set to go into low power mode whenever it is not performing conversions.
A sample/hold function allows the analog voltage at the positive input to vary during the actual A/D conversion. The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes.