UCC28702 Series
Constant-voltage, constant-current PWM with PSR, NTC option, and 150mV cable compensation
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Fault Protection | Topology | Frequency - Switching▲▼ | Frequency - Switching▲▼ | Voltage - Start Up▲▼ | Output Isolation | Voltage - Supply (Vcc/Vdd)▲▼ | Voltage - Supply (Vcc/Vdd)▲▼ | Package / Case | Operating Temperature▲▼ | Operating Temperature▲▼ | Supplier Device Package | Mounting Type | Internal Switch(s)▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Current Limiting, Over Voltage | Flyback | 1000 Hz | 130000 Hz | 21 V | Isolated | 35 V | 9 V | SOT-23-6 | 125 °C | -20 °C | SOT-23-6 | Surface Mount |
Key Features
• < 30-mW No-Load Power for 5-Star RatingPrimary-Side Regulation (PSR) Eliminates Opto-Coupler±5% Voltage and Current Regulation130-kHz Maximum Switching Frequency Enables High-PowerDensity Charger DesignsQuasi-Resonant Valley-Switching Operation for HighestOverall EfficiencyPatent-Pending Frequency-Jitter Scheme to Ease EMIComplianceWide VDD Range Allows Small Bias CapacitorClamped Gate-Drive Output for MOSFETProtection Functions: Overvoltage, Low-Line, andOvercurrentProgrammable Cable Compensation (UCC28700 Only)NTC Resistor Interface (UCC28701, UCC28702 and UCC28703Only) With Fixed Cable Compensation OptionsSOT-23 Package< 30-mW No-Load Power for 5-Star RatingPrimary-Side Regulation (PSR) Eliminates Opto-Coupler±5% Voltage and Current Regulation130-kHz Maximum Switching Frequency Enables High-PowerDensity Charger DesignsQuasi-Resonant Valley-Switching Operation for HighestOverall EfficiencyPatent-Pending Frequency-Jitter Scheme to Ease EMIComplianceWide VDD Range Allows Small Bias CapacitorClamped Gate-Drive Output for MOSFETProtection Functions: Overvoltage, Low-Line, andOvercurrentProgrammable Cable Compensation (UCC28700 Only)NTC Resistor Interface (UCC28701, UCC28702 and UCC28703Only) With Fixed Cable Compensation OptionsSOT-23 Package
Description
AI
The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.
Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.
The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.
The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.
Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.
The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.