Catalog(2 parts)
| Part | Package / Case | Number of Outputs▲▼ | Applications | Operating Temperature▲▼ | Operating Temperature▲▼ | Mounting Type | Voltage - Output | Voltage - Input▲▼ | Voltage - Input▲▼ | Supplier Device Package▲▼ | Supplier Device Package▲▼ | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS6508700RSKRD-CAP2™ Controller/Converter, Mobile PCs Voltage Regulator IC 12 Output 64-VQFN (8x8) | 64-VFQFN Exposed Pad | 12 ul | Controller/Converter, Mobile PCs | 85 °C | -40 °C | Surface Mount | Multiple | 5.599999904632568 V | 21 V | 8 ul | 8 ul | 64-VQFN |
Texas Instruments TPS6508700RSKTD-CAP2™ Controller/Converter, Mobile PCs Voltage Regulator IC 12 Output 64-VQFN (8x8) | 64-VFQFN Exposed Pad | 12 ul | Controller/Converter, Mobile PCs | 85 °C | -40 °C | Surface Mount | Multiple | 5.599999904632568 V | 21 V | 8 ul | 8 ul | 64-VQFN |
Key Features
• Wide VIN range from 5.6V to 21VThree variable-output voltage synchronous step-down controllers with D-CAP2™ topologyScalable output current using external FETs with selectable current limitI2C dynamic voltage scaling (DVS) Control for BUCK2 and BUCK6, external feedback for BUCK1Three variable-output voltage synchronous step-down converters with DCS-Control™ topology and I2C DVS capabilitiesVIN range from 4.5V to 5.5VVOUT range from 0.425V to 3.575VUp to 3A of output currentThree LDO regulators with adjustable output voltageLDOA1: I2C-selectable output voltage from 1.35V to 3.3V for up to 200mA of output currentLDOA2 and LDOA3: I2C-selectable output voltage from 0.7V to 1.5V for up to 600mA of output currentLDO with BUCK6 as input voltageThree load switches with slew rate controlUp to 300mA of output current with voltage drop less than 1.5% of nominal input voltageRDSON < 96mΩ at input voltage of 1.8V5V fixed-output voltage LDO (LDO5)Power supply for gate drivers of SMPS and for LDOA1Automatic switch to 5V buck for higher efficiencyBuilt-in sequencing by factory OTP programmingCTL1, CTL4, and CTL5 used for G3’, G3, S5, and S0 state selectionGPO1 and GPO2 Used for PG_S0 and PG_S5Open-drain interrupt output pinI2C interface supports:Standard mode (100kHz)Fast mode (400kHz)Fast mode plus (1MHz)Wide VIN range from 5.6V to 21VThree variable-output voltage synchronous step-down controllers with D-CAP2™ topologyScalable output current using external FETs with selectable current limitI2C dynamic voltage scaling (DVS) Control for BUCK2 and BUCK6, external feedback for BUCK1Three variable-output voltage synchronous step-down converters with DCS-Control™ topology and I2C DVS capabilitiesVIN range from 4.5V to 5.5VVOUT range from 0.425V to 3.575VUp to 3A of output currentThree LDO regulators with adjustable output voltageLDOA1: I2C-selectable output voltage from 1.35V to 3.3V for up to 200mA of output currentLDOA2 and LDOA3: I2C-selectable output voltage from 0.7V to 1.5V for up to 600mA of output currentLDO with BUCK6 as input voltageThree load switches with slew rate controlUp to 300mA of output current with voltage drop less than 1.5% of nominal input voltageRDSON < 96mΩ at input voltage of 1.8V5V fixed-output voltage LDO (LDO5)Power supply for gate drivers of SMPS and for LDOA1Automatic switch to 5V buck for higher efficiencyBuilt-in sequencing by factory OTP programmingCTL1, CTL4, and CTL5 used for G3’, G3, S5, and S0 state selectionGPO1 and GPO2 Used for PG_S0 and PG_S5Open-drain interrupt output pinI2C interface supports:Standard mode (100kHz)Fast mode (400kHz)Fast mode plus (1MHz)
Description
AI
The TPS6508700 device is a single-chip power-management IC (PMIC) designed for the AMD™ family 17h models 10h-1Fh processors targeted for notebooks and all-in-one desktops. The TPS6508700 device offers an input range from 5.6V to 21V, enabling use in a wide range of applications. The device is well suited for NVDC and non-NVDC power architecture using 2S, 3S, or 4S Li-Ion battery packs. The D-CAP2™ and DCS-Control™ high-frequency voltage regulators use small inductors and capacitors to achieve a small solution size. The D-CAP2 and DCS-control topologies have excellent transient response performance, which is optimal for processor core and system memory rails that have fast load switching. An I2C interface allows simple control either by an embedded controller (EC) or by a system on chip (SoC). The PMIC comes in an 8mm × 8mm, single-row VQFN package with thermal pad for good thermal dissipation and ease of board routing.
The TPS6508700 device is a single-chip power-management IC (PMIC) designed for the AMD™ family 17h models 10h-1Fh processors targeted for notebooks and all-in-one desktops. The TPS6508700 device offers an input range from 5.6V to 21V, enabling use in a wide range of applications. The device is well suited for NVDC and non-NVDC power architecture using 2S, 3S, or 4S Li-Ion battery packs. The D-CAP2™ and DCS-Control™ high-frequency voltage regulators use small inductors and capacitors to achieve a small solution size. The D-CAP2 and DCS-control topologies have excellent transient response performance, which is optimal for processor core and system memory rails that have fast load switching. An I2C interface allows simple control either by an embedded controller (EC) or by a system on chip (SoC). The PMIC comes in an 8mm × 8mm, single-row VQFN package with thermal pad for good thermal dissipation and ease of board routing.