TPD6S300 Series
USB Type-C™ port protector: short-to-VBUS overvoltage and 6-ch ESD protection
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Utilized IC / Part | Function | Primary Attributes | Supplied Contents | Type |
|---|---|---|---|---|---|
TPD6S300 | Circuit Protection | Overvoltage Protection | Board(s) | Power Management |
Key Features
• 4-Channels of Short-to-VBUSOvervoltage Protection (CC1, CC2, SBU1, SBU2): 24-VDCTolerant6-Channels of IEC 61000-4-2 ESD Protection (CC1, CC2, SBU1, SBU2, DP, DM)CC1, CC2 Overvoltage Protection FETs 600 mA capable for passing VCONNpowerCC Dead Battery Resistors integrated for handling dead battery use case in mobile devices3-mm × 3-mm WQFN Package4-Channels of Short-to-VBUSOvervoltage Protection (CC1, CC2, SBU1, SBU2): 24-VDCTolerant6-Channels of IEC 61000-4-2 ESD Protection (CC1, CC2, SBU1, SBU2, DP, DM)CC1, CC2 Overvoltage Protection FETs 600 mA capable for passing VCONNpowerCC Dead Battery Resistors integrated for handling dead battery use case in mobile devices3-mm × 3-mm WQFN Package
Description
AI
The TPD6S300 is a single chip USB Type-C port protection solution that provides 20-V Short-to-VBUSovervoltage and IEC ESD protection.
Since the release of the USB Type-C connector, many products and accessories for USB Type-C have been released which do not meet the USB Type-C specification. One example of this is USB Type-C Power Delivery adaptors that only place 20 V on the VBUSline. Another concern for USB Type-C is that mechanical twisting and sliding of the connector could short pins due to the close proximity they have in this small connector. This can cause 20-V VBUSto be shorted to the CC and SBU pins. Also, due to the close proximity of the pins in the Type-C connector, there is a heightened concern that debris and moisture will cause the 20-V VBUSpin to be shorted to the CC and SBU pins.
These non-ideal equipments and mechanical events make it necessary for the CC and SBU pins to be 20-V tolerant, even though they only operate at 5 V or lower. The TPD6S300 enables the CC and SBU pins to be 20-V tolerant without interfering with normal operation by providing overvoltage protection on the CC and SBU pins. The device places high voltage FETs in series on the SBU and CC lines. When a voltage above the OVP threshold is detected on these lines, the high voltage switches are opened up, isolating the rest of the system from the high voltage condition present on the connector.
Finally, most systems require IEC 61000-4-2 system level ESD protection for their external pins. The TPD6S300 integrates IEC 61000-4-2 ESD protection for the CC1, CC2, SBU1, SBU2, DP, DM pins, removing the need to place high voltage TVS diodes externally on the connector.
The TPD6S300 is a single chip USB Type-C port protection solution that provides 20-V Short-to-VBUSovervoltage and IEC ESD protection.
Since the release of the USB Type-C connector, many products and accessories for USB Type-C have been released which do not meet the USB Type-C specification. One example of this is USB Type-C Power Delivery adaptors that only place 20 V on the VBUSline. Another concern for USB Type-C is that mechanical twisting and sliding of the connector could short pins due to the close proximity they have in this small connector. This can cause 20-V VBUSto be shorted to the CC and SBU pins. Also, due to the close proximity of the pins in the Type-C connector, there is a heightened concern that debris and moisture will cause the 20-V VBUSpin to be shorted to the CC and SBU pins.
These non-ideal equipments and mechanical events make it necessary for the CC and SBU pins to be 20-V tolerant, even though they only operate at 5 V or lower. The TPD6S300 enables the CC and SBU pins to be 20-V tolerant without interfering with normal operation by providing overvoltage protection on the CC and SBU pins. The device places high voltage FETs in series on the SBU and CC lines. When a voltage above the OVP threshold is detected on these lines, the high voltage switches are opened up, isolating the rest of the system from the high voltage condition present on the connector.
Finally, most systems require IEC 61000-4-2 system level ESD protection for their external pins. The TPD6S300 integrates IEC 61000-4-2 ESD protection for the CC1, CC2, SBU1, SBU2, DP, DM pins, removing the need to place high voltage TVS diodes externally on the connector.