CDCE421A Series
Fully integrated wide range low-jitter crystal oscillator clock generator
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Fully integrated wide range low-jitter crystal oscillator clock generator
| Part | Ratio - Input:Output [custom] | Input | Voltage - Supply [Max] | Voltage - Supply [Min] | Output | Package / Case | Type | Operating Temperature [Min] | Operating Temperature [Max] | PLL | Differential - Input:Output | Frequency - Max [Max] | Mounting Type | Divider/Multiplier | Supplier Device Package | Number of Circuits |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments CDCE431YS | 1:1 | Crystal, LVCMOS | 3.6 V | 3 V | LVDS, LVPECL | Die | Clock Generator | -40 °C | 85 °C | No/Yes | 1.2 GHz | Surface Mount | Yes/No | Wafersale | 1 | |
Texas Instruments CDCE421ARGER | 1:1 | Crystal, LVCMOS | 3.6 V | 3 V | LVDS, LVPECL | 24-VFQFN Exposed Pad | Clock Generator | -40 °C | 85 °C | No/Yes | 1.2 GHz | Surface Mount | 24-VQFN (4x4) | 1 | ||
Texas Instruments CDCE421ARGET | 1:1 | Crystal, LVCMOS | 3.6 V | 3 V | LVDS, LVPECL | 24-VFQFN Exposed Pad | Clock Generator | -40 °C | 85 °C | No/Yes | 1.2 GHz | Surface Mount | 24-VQFN (4x4) | 1 |
Key Features
• Single Supply at 3.3 V for LVPECL or LVDS OperationHigh-Performance Clock Multiplier, Incorporating Crystal Oscillator Circuitry with Integrated Frequency SynthesizerLow Output Jitter: 380 fs RMS typical (from 10 kHz to 20 MHz)Low Phase Noise at High Frequency (708-MHz LVPECL):Typically -109 dBc/Hz at 10 kHz and -146dBc/Hz at 10 MHz from the carrierSupports Crystal or LVCMOS Input Frequencies from 27.35 MHz to 38.33 MHzOutput Frequency Ranges from 10.9 MHz to 766.7 MHz and from 875.2 MHz to 1175 MHzLow-Voltage Differential Signaling (LVDS) Output, 100-Differential Off-Chip Termination, 10.9-MHz to 400-MHz Frequency RangeDifferential Low-Voltage Positive Emitter Coupled Logic (LVPECL) Outputs, 10.9-MHz to 1.175-GHz Frequency RangeTwo Fully-Integrated Voltage-Controlled Oscillators (VCO) Support Wide Output Frequency RangeFully Integrated Programmable Loop FilterTypical Power Consumption at 3.3 V:274 mW in LVDS mode250 mW in LVPECL modeChip Enable Control PinSimple Serial Interface Allows Programming after ManufacturingIntegrated On-Chip Nonvolatile Memory (EEPROM) Stores Settings Without Applying High VoltageAvailable in 4-mm × 4-mm QFN-24 PackageESD Protection Exceeds 2 kV (HBM)Industrial Temperature Range: -40°C to +85°CAPPLICATIONSLow-Cost, High-Frequency Crystal OscillatorAll trademarks are the property of their respective owners.Single Supply at 3.3 V for LVPECL or LVDS OperationHigh-Performance Clock Multiplier, Incorporating Crystal Oscillator Circuitry with Integrated Frequency SynthesizerLow Output Jitter: 380 fs RMS typical (from 10 kHz to 20 MHz)Low Phase Noise at High Frequency (708-MHz LVPECL):Typically -109 dBc/Hz at 10 kHz and -146dBc/Hz at 10 MHz from the carrierSupports Crystal or LVCMOS Input Frequencies from 27.35 MHz to 38.33 MHzOutput Frequency Ranges from 10.9 MHz to 766.7 MHz and from 875.2 MHz to 1175 MHzLow-Voltage Differential Signaling (LVDS) Output, 100-Differential Off-Chip Termination, 10.9-MHz to 400-MHz Frequency RangeDifferential Low-Voltage Positive Emitter Coupled Logic (LVPECL) Outputs, 10.9-MHz to 1.175-GHz Frequency RangeTwo Fully-Integrated Voltage-Controlled Oscillators (VCO) Support Wide Output Frequency RangeFully Integrated Programmable Loop FilterTypical Power Consumption at 3.3 V:274 mW in LVDS mode250 mW in LVPECL modeChip Enable Control PinSimple Serial Interface Allows Programming after ManufacturingIntegrated On-Chip Nonvolatile Memory (EEPROM) Stores Settings Without Applying High VoltageAvailable in 4-mm × 4-mm QFN-24 PackageESD Protection Exceeds 2 kV (HBM)Industrial Temperature Range: -40°C to +85°CAPPLICATIONSLow-Cost, High-Frequency Crystal OscillatorAll trademarks are the property of their respective owners.
Description
AI
The CDCE421A is a high-performance, low phase noise clock generator. It has two fully-integrated, low-noise, LC-based voltage-controlled oscillators (VCOs) that operate in the 1.750-GHz to 2.350-GHz frequency range. It also features an integrated crystal oscillator that operates in conjunction with an external AT-cut crystal to produce a stable frequency reference for the phase-locked loop (PLL) based frequency synthesizer.
The output frequency (fOUT) is proportional to the frequency of the input crystal (fXTAL). The prescaler divider, feedback divider, output divider, and VCO selection set the output frequency with respect to fXTAL.
In the CDCE421A, the feedback divider is set automatically with respect to the prescaler setting. The product of the prescaler and the feedback divider should be between 60 and 64 as shown in to maintain a stable control loop.
The CDCE421A supports one differential LVDS clock output or one differential LVPECL output. All device settings are programmable through a proprietary simple serial interface (SSI).
The device operates in 3.3-V supply environment for both LVPECL and LVDS outputs and is characterized for operation from -40°C to +85°C. The CDCE421A is available in a QFN-24 4-mm × 4-mm package.
The CDCE421A provides several device enhancements to the CDCE421.
The CDCE421A is a high-performance, low phase noise clock generator. It has two fully-integrated, low-noise, LC-based voltage-controlled oscillators (VCOs) that operate in the 1.750-GHz to 2.350-GHz frequency range. It also features an integrated crystal oscillator that operates in conjunction with an external AT-cut crystal to produce a stable frequency reference for the phase-locked loop (PLL) based frequency synthesizer.
The output frequency (fOUT) is proportional to the frequency of the input crystal (fXTAL). The prescaler divider, feedback divider, output divider, and VCO selection set the output frequency with respect to fXTAL.
In the CDCE421A, the feedback divider is set automatically with respect to the prescaler setting. The product of the prescaler and the feedback divider should be between 60 and 64 as shown in to maintain a stable control loop.
The CDCE421A supports one differential LVDS clock output or one differential LVPECL output. All device settings are programmable through a proprietary simple serial interface (SSI).
The device operates in 3.3-V supply environment for both LVPECL and LVDS outputs and is characterized for operation from -40°C to +85°C. The CDCE421A is available in a QFN-24 4-mm × 4-mm package.
The CDCE421A provides several device enhancements to the CDCE421.