TPS24711 Series
2.5-V to 18-V hot swap controller with power limiting
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
2.5-V to 18-V hot swap controller with power limiting
| Part | Programmable Features | Current - Supply | Supplier Device Package | Features | Internal Switch(s) | Number of Channels [custom] | Operating Temperature [Min] | Operating Temperature [Max] | Applications | Mounting Type | Type | Package / Case | Voltage - Supply [Max] | Voltage - Supply [Min] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS24711DGSR | Current Limit, Fault Timeout, UVLO | 1 mA | 10-VSSOP | Auto Retry, Thermal Limit | 1 | -40 °C | 85 °C | General Purpose | Surface Mount | Hot Swap Controller | 10-MSOP, 10-TFSOP | 18 V | 2.5 V | |
Texas Instruments TPS24711DGS | Current Limit, Fault Timeout, UVLO | 1 mA | 10-VSSOP | Auto Retry, Thermal Limit | 1 | -40 °C | 85 °C | General Purpose | Surface Mount | Hot Swap Controller | 10-MSOP, 10-TFSOP | 18 V | 2.5 V |
Key Features
• 2.5-V to 18-V OperationAccurate Current Limiting for StartupProgrammable FET SOA ProtectionAccurate 25-mV Current-Sense ThresholdPower-Good OutputFast Breaker for Short-Circuit ProtectionProgrammable Fault TimerProgrammable UV ThresholdDrop-In Upgrade for LTC4211 – No LayoutChangesPG, FLT Active-High and Active-Low VersionsMSOP-10 Package2.5-V to 18-V OperationAccurate Current Limiting for StartupProgrammable FET SOA ProtectionAccurate 25-mV Current-Sense ThresholdPower-Good OutputFast Breaker for Short-Circuit ProtectionProgrammable Fault TimerProgrammable UV ThresholdDrop-In Upgrade for LTC4211 – No LayoutChangesPG, FLT Active-High and Active-Low VersionsMSOP-10 Package
Description
AI
The TPS24710/11/12/13 is an easy-to-use, 2.5 V to 18 V, hot-swap controller that safely drives an external N-channel MOSFET. The programmable current limit and fault time protect the supply and load from excessive current at startup. After startup, currents above the user-selected limit will be allowed to flow until programmed timeout – except in extreme overload events when the load is immediately disconnected from source. The low, 25mV current sense threshold is highly accurate and allows use of smaller, more efficient sense resistors yielding lower power loss and smaller footprint.
Programmable power limiting ensures the external MOSFET operates inside its safe operating area (SOA) at all times. This allows the use of smaller MOSFETS while improving system reliability. Power good and fault outputs are provided for status monitoring and downstream load control.
The TPS24710/11/12/13 is an easy-to-use, 2.5 V to 18 V, hot-swap controller that safely drives an external N-channel MOSFET. The programmable current limit and fault time protect the supply and load from excessive current at startup. After startup, currents above the user-selected limit will be allowed to flow until programmed timeout – except in extreme overload events when the load is immediately disconnected from source. The low, 25mV current sense threshold is highly accurate and allows use of smaller, more efficient sense resistors yielding lower power loss and smaller footprint.
Programmable power limiting ensures the external MOSFET operates inside its safe operating area (SOA) at all times. This allows the use of smaller MOSFETS while improving system reliability. Power good and fault outputs are provided for status monitoring and downstream load control.