TCAN3413 Series

3.3-V CAN FD transceiver with flexible IO and standby mode

Catalog

3.3-V CAN FD transceiver with flexible IO and standby mode

Part	Package Name	Duplex	Mounting Type	Number of Drivers	Number of Receivers	Operating Temperature (Max)	Operating Temperature (Min)	Package Length	Package Width	Type	Receiver Hysteresis	Protocol	Voltage - Supply (Maximum)	Voltage - Supply (Minimum)	Data Rate	Package / Case
Texas Instruments TCAN3413DR	8-SOIC	Half	Surface Mount	1	1	125 °C	-40 °C	0.154 in	3.9 mm	Transceiver	50 mV	CANbus	3.6 V	3 V	8 MHz
Texas Instruments TCAN3413DDFR	TSOT-23-8	Half	Surface Mount	1	1	125 °C	-40 °C			Transceiver	50 mV	CANbus	3.6 V	3 V	8 MHz	SOT-23-8 Thin TSOT-23-8
Texas Instruments TCAN3413DRBR	8-SON	Half	Surface Mount	1	1	150 °C	-40 °C	3 mm	3 mm	Transceiver	50 mV	CANbus	3.6 V	3 V	8 MHz	8-VDFN Exposed Pad

Catalog

3.3-V CAN FD transceiver with flexible IO and standby mode

Description

The TCAN3413 and TCAN3414 are controller area network (CAN) FD transceivers that are compatible with the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification. The transceivers have certified electromagnetic compatibility (EMC) operation for use with classical CAN and CAN FD networks up to 5 megabits per second (Mbps). Up to 8 Mbps operation in simpler networks is possible with these devices. The TCAN3413 includes internal logic level translation through the V IO pin. Allowing the direct interface of the transceiver I/O to 1.8-V, 2.5-V, or 3.3-V logic levels. The transceivers support a low-power standby mode, and a wake over CAN which is compliant to the ISO 11898-2:2016 defined wake-up pattern (WUP). The transceivers include thermal-shutdown (TSD), TXD-dominant time-out (DTO), supply undervoltage detection, and ±58-V bus fault protection. The devices have defined fail-safe behavior in supply undervoltage or floating pin scenarios. The transceivers are available in industry-standard SOIC-8, the VSON-8, and a space-saving small footprint SOT-23 packages. The TCAN3413 and TCAN3414 are controller area network (CAN) FD transceivers that are compatible with the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification. The transceivers have certified electromagnetic compatibility (EMC) operation for use with classical CAN and CAN FD networks up to 5 megabits per second (Mbps). Up to 8 Mbps operation in simpler networks is possible with these devices. The TCAN3413 includes internal logic level translation through the V IO pin. Allowing the direct interface of the transceiver I/O to 1.8-V, 2.5-V, or 3.3-V logic levels. The transceivers support a low-power standby mode, and a wake over CAN which is compliant to the ISO 11898-2:2016 defined wake-up pattern (WUP). The transceivers include thermal-shutdown (TSD), TXD-dominant time-out (DTO), supply undervoltage detection, and ±58-V bus fault protection. The devices have defined fail-safe behavior in supply undervoltage or floating pin scenarios. The transceivers are available in industry-standard SOIC-8, the VSON-8, and a space-saving small footprint SOT-23 packages.