TCAN844-Q1 Series

Automotive CAN transceiver with standby for cost-optimized designs

Catalog

Automotive CAN transceiver with standby for cost-optimized designs

Part	Protocol	Number of Drivers	Number of Receivers	Voltage - Supply (Maximum)	Voltage - Supply (Minimum)	Package Length	Package Name	Package Width	Mounting Type	Operating Temperature (Min)	Operating Temperature (Max)	Receiver Hysteresis	Grade	Qualification	Duplex	Data Rate	Type	Package / Case
Texas Instruments TCAN844VDRQ1	CANbus	1	1	5.25 V	4.75 V	0.154 in	8-SOIC	3.9 mm	Surface Mount	-40 °C	150 °C	80 mV	Automotive	AEC-Q100	Half	5 MBd	Transceiver
Texas Instruments TCAN844VDDFRQ1	CANbus	1	1	5.25 V	4.75 V		TSOT-23-8		Surface Mount	-40 °C	150 °C	80 mV	Automotive	AEC-Q100	Half	5 MBd	Transceiver	SOT-23-8 Thin TSOT-23-8
Texas Instruments TCAN844VDRBRQ1	CANbus	1	1	5.25 V	4.75 V	3 mm	8-SON	3 mm	Surface Mount Wettable Flank	-40 °C	150 °C	80 mV	Automotive	AEC-Q100	Half	5 MBd	Transceiver	8-VDFN Exposed Pad
Texas Instruments TCAN844DRBRQ1	CANbus	1	1	5.25 V	4.75 V	3 mm	8-SON	3 mm	Surface Mount Wettable Flank	-40 °C	150 °C	80 mV	Automotive	AEC-Q100	Half	5 MBd	Transceiver	8-VDFN Exposed Pad
Texas Instruments TCAN844DRQ1	CANbus	1	1	5.25 V	4.75 V	0.154 in	8-SOIC	3.9 mm	Surface Mount	-40 °C	150 °C	80 mV	Automotive	AEC-Q100	Half	5 MBd	Transceiver
Texas Instruments TCAN844DDFRQ1	CANbus	1	1	5.25 V	4.75 V		TSOT-23-8		Surface Mount	-40 °C	150 °C	80 mV	Automotive	AEC-Q100	Half	5 MBd	Transceiver	SOT-23-8 Thin TSOT-23-8

Catalog

Automotive CAN transceiver with standby for cost-optimized designs

Description

The TCAN844-Q1 is a high speed controller area network (CAN) transceiver that is compatible with physical layer requirements of the ISO 11898-2:2024 high-speed CAN specification. The device includes internal logic level translation via the VIO pin to allow for interfacing the transceiver I/O directly to 3.3V, or 5V logic levels. The transceiver supports a low-power standby mode and wake over CAN which is compatible to the ISO 11898-2:2024 defined wake-up pattern (WUP). The transceivers also include thermal-shutdown (TSD), TXD-dominant time-out (DTO), supply undervoltage detection, and ±40V bus fault protection. The devices have defined fail-safe behavior in supply undervoltage or floating pin scenarios. These transceivers are not only available in industry-standard SOIC-8 and VSON-8 packages, but also have a space-saving small footprint SOT-23 package option. The TCAN844-Q1 is a high speed controller area network (CAN) transceiver that is compatible with physical layer requirements of the ISO 11898-2:2024 high-speed CAN specification. The device includes internal logic level translation via the VIO pin to allow for interfacing the transceiver I/O directly to 3.3V, or 5V logic levels. The transceiver supports a low-power standby mode and wake over CAN which is compatible to the ISO 11898-2:2024 defined wake-up pattern (WUP). The transceivers also include thermal-shutdown (TSD), TXD-dominant time-out (DTO), supply undervoltage detection, and ±40V bus fault protection. The devices have defined fail-safe behavior in supply undervoltage or floating pin scenarios. These transceivers are not only available in industry-standard SOIC-8 and VSON-8 packages, but also have a space-saving small footprint SOT-23 package option.