LT8361EMSE#TRPBF
ActiveLOW IQBOOST/SEPIC/INVERTING CONVERTER WITH 2A, 100V SWITCH
Deep-Dive with AI
Search across all available documentation for this part.
LT8361EMSE#TRPBF
ActiveLOW IQBOOST/SEPIC/INVERTING CONVERTER WITH 2A, 100V SWITCH
Technical Specifications
Parameters and characteristics for this part
| Specification | LT8361EMSE#TRPBF |
|---|---|
| Current - Output | 2 A |
| Frequency - Switching [Max] | 2 MHz |
| Frequency - Switching [Min] | 300 kHz |
| Function | Step-Up |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 3 mm, 0.118 in, 12 |
| Package / Case | 16-TFSOP, Exposed Pad |
| Supplier Device Package | 16-MSOP-EP |
| Topology | SEPIC, Boost |
| Voltage - Input (Max) [Max] | 60 V |
| Voltage - Input (Min) [Min] | 2.8 V |
| Voltage - Output (Max) [Max] | 100 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 7.67 | |
| 10 | $ 5.24 | |||
| 25 | $ 4.61 | |||
| 100 | $ 3.91 | |||
| 250 | $ 3.57 | |||
| 500 | $ 3.36 | |||
| 1000 | $ 3.19 | |||
| Digi-Reel® | 1 | $ 7.67 | ||
| 10 | $ 5.24 | |||
| 25 | $ 4.61 | |||
| 100 | $ 3.91 | |||
| 250 | $ 3.57 | |||
| 500 | $ 3.36 | |||
| 1000 | $ 3.19 | |||
| Tape & Reel (TR) | 2500 | $ 3.04 | ||
Description
General part information
LT8361 Series
The LT8361 is a current mode DC/DC converter with a 100V, 2A switch operating from a 2.8V to 60V input. With a unique single feedback pin architecture it is capable of boost, SEPIC or inverting configurations. Burst Mode operation consumes as low as 9μA quiescent current to maintain high efficiency at very low output currents, while keeping typical output ripple below 15mV.An external compensation pin allows optimization of loop bandwidth over a wide range of input and output voltages and programmable switching frequencies between 300kHz and 2MHz. A SYNC/MODE pin allows synchronization to an external clock. It can also be used to select between burst or pulse-skip modes of operation with or without Spread Spectrum Frequency Modulation for low EMI. For increased efficiency, a BIAS pin can accept a second input to supply the INTVCCregulator. Additional features include frequency foldback and programmable soft-start to control inductor current during startup.The LT8361 is available in a thermally enhanced 16-lead MSOP package with four pins removed for high voltage pin spacings.APPLICATIONSIndustrial and AutomotiveTelecomMedical Diagnostic EquipmentPortable Electronics
Documents
Technical documentation and resources