USBDF02W5

Obsolete

STMicroelectronics

FILTER RC(PI) 15 OHMS ESD SMD

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet

USBDF02W5

Obsolete

STMicroelectronics

FILTER RC(PI) 15 OHMS ESD SMD

Deep-Dive with AI

DocumentsDatasheet

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	USBDF02W5

Applications	USB
ESD Protection	True
Filter Order	2nd
Height [z]	0.043 in
Height [z]	1.09 mm
Mounting Type	Surface Mount
Number of Channels [custom]	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	SC-70-5, 5-TSSOP, SOT-353
Resistance - Channel (Ohms) [custom]	15 Ohms
Size / Dimension [x]	2 mm
Size / Dimension [x]	0.079 in
Size / Dimension [y]	0.049 in
Size / Dimension [y]	1.25 mm
Technology	RC (Pi)
Type	Low Pass
Values	15 Ohms, 47 pF

USBDF01 Series

2-line EMI filter and ESD protection with R pull-up, for USB interfaces

Part	Applications	Size / Dimension [x]	Size / Dimension [x]	Size / Dimension [y]	Size / Dimension [y]	Values	Attenuation Value	Number of Channels [custom]	Filter Order	Resistance - Channel (Ohms)	Package / Case	Technology	ESD Protection	Height [z]	Height [z]	Type	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Resistance - Channel (Ohms) [custom]
STMicroelectronics USBDF01W5	USB	2 mm	0.079 in	0.049 in	1.25 mm	33 Ohms 47 pF	-25 dB	2	2nd	33 Ohms	5-TSSOP SC-70-5 SOT-353	RC (Pi)		0.043 in	1.09 mm	Low Pass	Surface Mount	85 °C	-40 °C
STMicroelectronics USBDF02W5	USB	2 mm	0.079 in	0.049 in	1.25 mm	15 Ohms 47 pF		2	2nd		5-TSSOP SC-70-5 SOT-353	RC (Pi)		0.043 in	1.09 mm	Low Pass	Surface Mount	85 °C	-40 °C	15 Ohms

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Description

General part information

USBDF01 Series

The USB specification requires USB downstream ports to be terminated with pull-down resistors from the D+ and D- lines to ground. On the implementation of USB systems, the radiated and conducted EMI should be kept within the required levels as stated by the FCC regulations. In addition to the requirements of termination and EMC compatibility, the computing devices are required to be tested for ESD susceptibility.

The USBDFxxW5 provides the recommended line termination while implementing a low pass filter to limit EMI levels and providing ESD protection which exceeds IEC 61000-4-2 level 4 standard. The device is packaged in a SOT323-5L, which is a very small (50% smaller than the standard SOT23).

Documents

Technical documentation and resources