Technical Specifications
Parameters and characteristics for this part
| Specification | VIPER26LDTR |
|---|---|
| Duty Cycle | 70 % |
| Fault Protection | Over Temperature, Current Limiting |
| Frequency - Switching | 60 kHz |
| Internal Switch(s) | True |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Isolation | Either |
| Package / Case | 16-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Power (Watts) | 20 W |
| Supplier Device Package | 16-SO |
| Topology | Flyback |
| Voltage - Breakdown | 800 V |
| Voltage - Supply (Vcc/Vdd) [Max] | 23.5 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 11.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.30 | |
| 10 | $ 1.16 | |||
| 25 | $ 1.10 | |||
| 100 | $ 0.91 | |||
| 250 | $ 0.85 | |||
| 500 | $ 0.75 | |||
| 1000 | $ 0.59 | |||
| Digi-Reel® | 1 | $ 1.30 | ||
| 10 | $ 1.16 | |||
| 25 | $ 1.10 | |||
| 100 | $ 0.91 | |||
| 250 | $ 0.85 | |||
| 500 | $ 0.75 | |||
| 1000 | $ 0.59 | |||
| Tape & Reel (TR) | 2500 | $ 0.55 | ||
| 5000 | $ 0.52 | |||
| 12500 | $ 0.50 | |||
| Newark | Each (Supplied on Full Reel) | 1 | $ 0.77 | |
| 3000 | $ 0.74 | |||
| 6000 | $ 0.68 | |||
| 12000 | $ 0.61 | |||
| 18000 | $ 0.58 | |||
| 30000 | $ 0.57 | |||
Description
General part information
VIPER26 Series
The VIPER26 device is a smart high voltage converter that integrates an 800 V avalanche-rugged power MOSFET with PWM current mode control. The power MOSFET with 800 V breakdown voltage allows an extended input voltage range to be applied, as well as the size of the DRAIN snubber circuit to be reduced.
This IC meets the most stringent energy-saving standards with very low consumption and burst mode operation under light load.
The design of flyback, buck and buck boost converters is supported. The integrated HV startup, sense-FET, error amplifier and oscillator with jitter allow complete application designs with a minimum number of components.
Documents
Technical documentation and resources