TPS2559DRCT
Active1.2-4.7A ADJUSTABLE ILIMIT, 2.5-6.5V, 13MΩ USB POWER SWITCH, ACTIVE-HIGH
Deep-Dive with AI
Search across all available documentation for this part.
TPS2559DRCT
Active1.2-4.7A ADJUSTABLE ILIMIT, 2.5-6.5V, 13MΩ USB POWER SWITCH, ACTIVE-HIGH
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TPS2559DRCT | TPS2559 Series |
|---|---|---|
| Contents | - | Board(s) |
| Current - Output (Max) [Max] | 5.5 A | 5.5 A |
| Fault Protection | Over Temperature, Current Limiting (Adjustable), UVLO | Over Temperature, Current Limiting (Adjustable), UVLO, Reverse Current |
| Features | Slew Rate Controlled, Status Flag | Slew Rate Controlled, Status Flag |
| Function | - | Power Distribution Switch (Load Switch) |
| Grade | - | Automotive |
| Input Type | Non-Inverting | Non-Inverting |
| Interface | On/Off | On/Off |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Outputs | 1 | 1 |
| Operating Temperature [Max] | 125 ¯C | 125 ¯C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | High Side | High Side |
| Output Type | N-Channel | N-Channel |
| Package / Case | 10-VFDFN Exposed Pad | 10-VFDFN Exposed Pad |
| Qualification | - | AEC-Q100 |
| Ratio - Input:Output [custom] | 1:1 | 1:1 |
| Rds On (Typ) | 13 mOhm | 13 mOhm |
| Supplied Contents | - | Board(s) |
| Supplier Device Package | 10-VSON (3x3) | 10-VSON (3x3) |
| Switch Type | General Purpose | General Purpose |
| Type | - | Power Management |
| Utilized IC / Part | - | TPS2559 |
| Voltage - Load [Max] | 6.5 V | 6.5 V |
| Voltage - Load [Min] | 2.5 V | 2.5 V |
| Voltage - Supply (Vcc/Vdd) | Not Required | Not Required |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPS2559 Series
1.2-4.7A adjustable ILIMIT, 2.5-6.5V, 13mΩ USB power switch, active-high
| Part | Features | Voltage - Load [Max] | Voltage - Load [Min] | Fault Protection | Voltage - Supply (Vcc/Vdd) | Output Type | Current - Output (Max) [Max] | Supplier Device Package | Rds On (Typ) | Operating Temperature [Max] | Operating Temperature [Min] | Package / Case | Mounting Type | Ratio - Input:Output [custom] | Switch Type | Output Configuration | Number of Outputs | Input Type | Interface | Supplied Contents | Contents | Utilized IC / Part | Type | Function | Qualification | Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS2559DRCRThe TPS2559 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. TheFAULTlogic output asserts low during overcurrent or overtemperature conditions.
The TPS2559 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. TheFAULTlogic output asserts low during overcurrent or overtemperature conditions. | Slew Rate Controlled, Status Flag | 6.5 V | 2.5 V | Current Limiting (Adjustable), Over Temperature, UVLO | Not Required | N-Channel | 5.5 A | 10-VSON (3x3) | 13 mOhm | 125 ¯C | -40 °C | 10-VFDFN Exposed Pad | Surface Mount | 1:1 | General Purpose | High Side | 1 | Non-Inverting | On/Off | |||||||
Texas Instruments TPS2559DRCTThe TPS2559 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. TheFAULTlogic output asserts low during overcurrent or overtemperature conditions.
The TPS2559 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. TheFAULTlogic output asserts low during overcurrent or overtemperature conditions. | Slew Rate Controlled, Status Flag | 6.5 V | 2.5 V | Current Limiting (Adjustable), Over Temperature, UVLO | Not Required | N-Channel | 5.5 A | 10-VSON (3x3) | 13 mOhm | 125 ¯C | -40 °C | 10-VFDFN Exposed Pad | Surface Mount | 1:1 | General Purpose | High Side | 1 | Non-Inverting | On/Off | |||||||
Texas Instruments TPS2559EVM-624TPS2559 Power Distribution Switch (Load Switch) Power Management Evaluation Board | Board(s) | Board(s) | TPS2559 | Power Management | Power Distribution Switch (Load Switch) | |||||||||||||||||||||
Texas Instruments TPS2559QWDRCTQ1The TPS2559-Q1 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559-Q1 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559-Q1.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. TheFAULTlogic output asserts low during overcurrent or overtemperature conditions.
The TPS2559-Q1 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559-Q1 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559-Q1.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. TheFAULTlogic output asserts low during overcurrent or overtemperature conditions. | Slew Rate Controlled, Status Flag | 6.5 V | 2.5 V | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO | Not Required | N-Channel | 5.5 A | 10-VSON (3x3) | 13 mOhm | 125 ¯C | -40 °C | 10-VFDFN Exposed Pad | Surface Mount | 1:1 | General Purpose | High Side | 1 | Non-Inverting | On/Off | AEC-Q100 | Automotive |
Description
General part information
TPS2559 Series
The TPS2559 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. TheFAULTlogic output asserts low during overcurrent or overtemperature conditions.
The TPS2559 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559.