The MAX32007 is a fully integrated, high performance, high speed 3Gbps octal-channel pin electronics driver that integrates multiple automatic test equipment (ATE) functions into a single IC. This DCL (driver/comparator/load) device is compatible with most high-speed logic families and includes a 4-level driver, dynamic clamps, window comparator, passive load, differential comparator, slew rate control, driver and comparator cable droop compensation, voltage clamps, PMU switches, and level-setting DACs.The MAX32007 driver features a -1.5V to +4.5V input range, high-impedance mode, active-termination (3rd-level drive), and VHH programming (4th-level drive) up to 7.1V. The window comparators provide low timing variation over changes in slew rate, pulse width, or overdrive voltage. The MAX32007 features dynamic clamps that limit high-speed device-under-test (DUT) waveforms as well as cable droop compensation for optimization of driver and return path signals. The integrated passive load is rated for ±12mA. Configuration of the many features are done through a 50MHz SPI interface.The MAX32007 is available in a 16mm x 10mm x 1.4mm csBGA package with exposed pad on the top for easy heat removal. The ball pitch is 0.8mm with a ball grid array of 19x12. Typical power dissipation is rated for 0.89W per channel. The MAX32007 operates over an internal die temperature range of +40°C to +100°C with a nominal operating point of +70°C. The device provides both a temperature monitor output (TSA) and an over-temp indicator (TSD).ApplicationsSoC ATEMemory ATEDigital TestersBurn-In TestersWafer Testers