LT8672JMS#TRPBF
ActiveACTIVE RECTIFIER CONTROLLER WITH REVERSE PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.
LT8672JMS#TRPBF
ActiveACTIVE RECTIFIER CONTROLLER WITH REVERSE PROTECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LT8672JMS#TRPBF |
|---|---|
| Channel Type | Single |
| Current - Peak Output (Source, Sink) [custom] | -50 mA |
| Current - Peak Output (Source, Sink) [custom] | 300 mA |
| Gate Type | N-Channel MOSFET |
| Grade | Automotive |
| Input Type | Non-Inverting |
| Mounting Type | Surface Mount |
| Number of Drivers | 1 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 10-MSOP, 10-TFSOP |
| Package / Case [x] | 3 mm |
| Package / Case [x] | 0.118 in |
| Qualification | AEC-Q100 |
| Supplier Device Package | 10-MSOP |
| Voltage - Supply [Max] | 42 V |
| Voltage - Supply [Min] | 3 V |
LT8672 Series
Active Rectifier Controller with Reverse Protection
| Part | Input Type | Operating Temperature [Min] | Operating Temperature [Max] | Gate Type | Supplier Device Package | Channel Type | Voltage - Supply [Min] | Voltage - Supply [Max] | Number of Drivers | Mounting Type | Package / Case | Package / Case [x] | Package / Case [x] | Qualification | Current - Peak Output (Source, Sink) [custom] | Current - Peak Output (Source, Sink) [custom] | Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices | Non-Inverting | -40 °C | 125 ¯C | N-Channel MOSFET | 10-DFN (3x2) | Single | 3 V | 42 V | 1 | Surface Mount | 10-WFDFN Exposed Pad | ||||||
Analog Devices | Non-Inverting | -40 °C | 125 ¯C | N-Channel MOSFET | 10-MSOP | Single | 3 V | 42 V | 1 | Surface Mount | 10-MSOP 10-TFSOP | 3 mm | 0.118 in | ||||
Analog Devices | Non-Inverting | -40 °C | 150 °C | N-Channel MOSFET | 10-MSOP | Single | 3 V | 42 V | 1 | Surface Mount | 10-MSOP 10-TFSOP | 3 mm | 0.118 in | AEC-Q100 | -50 mA | 300 mA | Automotive |
Analog Devices | Non-Inverting | -40 °C | 150 °C | N-Channel MOSFET | 10-DFN (3x2) | Single | 3 V | 42 V | 1 | Surface Mount | 10-WFDFN Exposed Pad | AEC-Q100 | 50 mA | 50 mA | Automotive | ||
Analog Devices | Non-Inverting | -40 °C | 150 °C | N-Channel MOSFET | 10-DFN (3x2) | Single | 3 V | 42 V | 1 | Surface Mount | 10-WFDFN Exposed Pad | ||||||
Analog Devices | Non-Inverting | -40 °C | 150 °C | N-Channel MOSFET | 10-MSOP | Single | 3 V | 42 V | 1 | Surface Mount | 10-MSOP 10-TFSOP | 3 mm | 0.118 in | AEC-Q100 | -50 mA | 300 mA | Automotive |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 2500 | $ 2.45 | |
Description
General part information
LT8672 Series
The LT8672 is an active rectifier controller for reverse input protection. It drives an external N-channel MOSFET to replace a power Schottky diode. Its very low quiescent current and fast transient response meet the tough requirements in automotive applications where AC input signals of up to 100kHz are present. These signals are rectified with minimum power dissipation on the external FET, simplifying thermal management on the PCB.With a drop of only 20mV, the LT8672 solution eases the minimum input voltage requirement during cold crank and start-stop, allowing simpler and more efficient circuits. If the input power source fails or is shorted, a fast turn-off minimizes reverse current transients. An available shutdown mode reduces the quiescent current to 3.5μA.An integrated auxiliary boost regulator provides the required boost voltage to turn the external FET fully on. A power good pin signals when the external FET is ready to take load current.ApplicationsAutomotive Battery ProtectionIndustrial SuppliesPortable Instrumentation
Documents
Technical documentation and resources