STM6600DQ25DM6F
ActivePROCESSOR SUPERVISOR 3.3V 1 ACTIVE LOW/OPEN DRAIN/PUSH-PULL 12-PIN TDFN T/R
Deep-Dive with AI
Search across all available documentation for this part.
STM6600DQ25DM6F
ActivePROCESSOR SUPERVISOR 3.3V 1 ACTIVE LOW/OPEN DRAIN/PUSH-PULL 12-PIN TDFN T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | STM6600DQ25DM6F |
|---|---|
| Mounting Type | Surface Mount |
| Number of Voltages Monitored | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output | Open Drain or Open Collector |
| Package / Case | 12-WFDFN |
| Reset | Active Low |
| Supplier Device Package | 12-TDFN (2x3) |
| Type | Smart ON/OFF Controller |
| Voltage - Threshold | 3.3 V |
STM6600 Series
Smart push-button on/off controller with Smart Reset and power-on lockout
| Part | Operating Temperature [Max] | Operating Temperature [Min] | Output | Supplier Device Package | Package / Case | Reset | Type | Number of Voltages Monitored | Voltage - Threshold | Mounting Type |
|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics | 85 °C | -40 °C | Open Drain or Open Collector | 12-TDFN (2x3) | 12-WFDFN | Active Low | Smart ON/OFF Controller | 1 | 3.4 V | Surface Mount |
STMicroelectronics | 85 °C | -40 °C | Open Drain or Open Collector | 12-TDFN (2x3) | 12-WFDFN | Active Low | Smart ON/OFF Controller | 1 | 3.3 V | Surface Mount |
STMicroelectronics | 85 °C | -40 °C | Open Drain or Open Collector | 12-TDFN (2x3) | 12-WFDFN | Active Low | Smart ON/OFF Controller | 1 | 3.3 V | Surface Mount |
STMicroelectronics | 85 °C | -40 °C | Open Drain or Open Collector | 12-TDFN (2x3) | 12-WFDFN | Active Low | Smart ON/OFF Controller | 1 | 3.5 V | Surface Mount |
STMicroelectronics | 85 °C | -40 °C | Open Drain or Open Collector | 12-TDFN (2x3) | 12-WFDFN | Active Low | Smart ON/OFF Controller | 1 | 3.4 V | Surface Mount |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.70 | |
| 10 | $ 2.42 | |||
| 25 | $ 2.28 | |||
| 100 | $ 1.95 | |||
| 250 | $ 1.83 | |||
| 500 | $ 1.60 | |||
| 1000 | $ 1.32 | |||
| Digi-Reel® | 1 | $ 2.70 | ||
| 10 | $ 2.42 | |||
| 25 | $ 2.28 | |||
| 100 | $ 1.95 | |||
| 250 | $ 1.83 | |||
| 500 | $ 1.60 | |||
| 1000 | $ 1.32 | |||
| Tape & Reel (TR) | 3000 | $ 1.13 | ||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 2.34 | |
| 10 | $ 1.74 | |||
| 25 | $ 1.59 | |||
| 50 | $ 1.50 | |||
| 100 | $ 1.42 | |||
| 250 | $ 1.34 | |||
| 500 | $ 1.29 | |||
| 1000 | $ 1.25 | |||
Description
General part information
STM6600 Series
The STM6600-01 devices monitor the state of connected push-button(s) as well as sufficient supply voltage. An enable output controls power for the application through the MOSFET transistor, DC-DC converter, regulator, etc. If the supply voltage is above a precise voltage threshold, the enable output can be asserted by a simple press of the button. Factory-selectable supply voltage thresholds are determined by highly accurate and temperature-compensated references. An interrupt is asserted by pressing the push-button during normal operation and can be used to request a system power-down. The interrupt is also asserted if undervoltage is detected. By a long push of one button (PB) or two buttons (PBandSR) either a reset is asserted or power for the application is disabled depending on the option used.
The device also offers additional features such as precise 1.5 V voltage reference with very tight accuracy of 1%, separate output indicating undervoltage detection and separate output for distinguishing between interrupt by push-button or undervoltage.
The device consumes very low current of 6 μA during normal operation and only 0.6 μA current during standby.
Documents
Technical documentation and resources