LT3744IUHE#PBF
ActiveLED DRIVER, 1MHZ, 125DEG C, QFN-36 ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.
LT3744IUHE#PBF
ActiveLED DRIVER, 1MHZ, 125DEG C, QFN-36 ROHS COMPLIANT: YES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LT3744IUHE#PBF |
|---|---|
| Dimming | Analog, PWM |
| Frequency | 1 MHz |
| Internal Switch(s) | False |
| Mounting Type | Surface Mount |
| Number of Outputs | 3 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 36-WFQFN Exposed Pad |
| Supplier Device Package | 36-QFN (5x6) |
| Topology | Step-Down (Buck) |
| Type | DC DC Controller |
| Voltage - Supply (Max) [Max] | 36 V |
| Voltage - Supply (Min) [Min] | 3.3 V |
LT3744 Series
High Current Synchronous Step-Down LED Driver
| Part | Operating Temperature [Min] | Operating Temperature [Max] | Dimming | Mounting Type | Package / Case | Topology | Voltage - Supply (Min) [Min] | Type | Internal Switch(s) | Voltage - Supply (Max) [Max] | Supplier Device Package | Frequency | Number of Outputs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices | -40 °C | 125 °C | Analog PWM | Surface Mount | 36-WFQFN Exposed Pad | Step-Down (Buck) | 3.3 V | DC DC Controller | 36 V | 36-QFN (5x6) | 1 MHz | 3 | |
Analog Devices | -40 °C | 125 °C | Analog PWM | Surface Mount | 36-WFQFN Exposed Pad | Step-Down (Buck) | 3.3 V | DC DC Controller | 36 V | 36-QFN (5x6) | 1 MHz | 3 |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
Description
General part information
LT3744 Series
The LT3744 is a fixed frequency synchronous step-down DC/DC controller designed to drive a LED load at up to 20A continuous or 40A pulsed. The peak current mode controller will maintain ±3% LED current regulation over a wide output voltage range, from VEE to VIN. By allowing VEE to float to negative voltages, several LEDs in series can be driven from a single Li-Ion battery with a simple, single step-down output stage. PWM dimming is achieved with the PWM pins. The regulated LED current is set with analog voltages at the CTRL pins. Regulated voltage and overvoltage protection are set with a voltage divider from the output to the FB pin. The switching frequency is programmable from 100kHz to 1MHz through an external resistor on the RT pin.Additional features include an accurate external reference voltage, a control input for thermally derating regulation current, an accurate EN/UVLO pin, an open-drain output fault flag, OVLO, frequency synchronization, and thermal shutdown.ApplicationsLED Driver for DLP ProjectorsHeads-Up DisplaysHigh Power LED
Documents
Technical documentation and resources