L6362ATR
ActiveIO-LINK COMMUNICATION TRANSCEIVER 230.4KBD 1RECEIVER 1 12-PIN VFDFPN-EP T/R
Deep-Dive with AI
Search across all available documentation for this part.
L6362ATR
ActiveIO-LINK COMMUNICATION TRANSCEIVER 230.4KBD 1RECEIVER 1 12-PIN VFDFPN-EP T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | L6362ATR |
|---|---|
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 12-VFDFN Exposed Pad |
| Protocol | IO-Link |
| Supplier Device Package | 12-VFDFPN (3x3) |
| Type | Transceiver |
| Voltage - Supply [Max] | 36 V |
| Voltage - Supply [Min] | 7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.01 | |
| 10 | $ 2.25 | |||
| 25 | $ 2.06 | |||
| 100 | $ 1.86 | |||
| 250 | $ 1.76 | |||
| 500 | $ 1.70 | |||
| 1000 | $ 1.65 | |||
| Digi-Reel® | 1 | $ 3.01 | ||
| 10 | $ 2.25 | |||
| 25 | $ 2.06 | |||
| 100 | $ 1.86 | |||
| 250 | $ 1.76 | |||
| 500 | $ 1.70 | |||
| 1000 | $ 1.65 | |||
| Tape & Reel (TR) | 3000 | $ 1.45 | ||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 3.01 | |
| 10 | $ 2.26 | |||
| 25 | $ 2.13 | |||
| 50 | $ 2.00 | |||
| 100 | $ 1.87 | |||
| 250 | $ 1.76 | |||
| 500 | $ 1.70 | |||
| 1000 | $ 1.65 | |||
Description
General part information
L6362A Series
The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment. The industrial environment could be a PLC, an IO-Link master, a relay or a valve. The L6362A is protected against reverse polarity, among VCC, GND, OUTH, OUTL and I/Q pins. Furthermore, the IC is protected against output short-circuit, overvoltage and impulse voltage withstand (±1 kV pulse amplitude, 1.2/50 μs pulse duration, 500 Ω source impedance).