Zenode.ai Logo
Beta
K
LT5575EUF#PBF - 16 QFN EP

LT5575EUF#PBF

Active
Analog Devices

RF IC, DEMODULATOR, QUADRATURE, 800 MHZ TO 2.7 GHZ, 4.5 TO 5.25 V SUPPLY, -40 TO 85 °C, QFN-EP-16

Deep-Dive with AI

Search across all available documentation for this part.

LT5575EUF#PBF - 16 QFN EP

LT5575EUF#PBF

Active
Analog Devices

RF IC, DEMODULATOR, QUADRATURE, 800 MHZ TO 2.7 GHZ, 4.5 TO 5.25 V SUPPLY, -40 TO 85 °C, QFN-EP-16

Deep-Dive with AI

Technical Specifications

Parameters and characteristics for this part

SpecificationLT5575EUF#PBF
Current - Supply155 mA
FunctionDemodulator
Gain2 dBic
LO Frequency [Max]2.7 GHz
LO Frequency [Min]800 MHz
Mounting TypeSurface Mount
Noise Figure15.7 dB
P1dB12.3 dBm
Package / Case16-WQFN Exposed Pad
RF Frequency [Max]2.7 GHz
RF Frequency [Min]800 MHz
Supplier Device Package16-QFN (4x4)
Voltage - Supply [Max]5.25 V
Voltage - Supply [Min]4.5 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyTube 1$ 18.98
10$ 13.89
25$ 12.59
100$ 12.00
NewarkEach 1$ 18.98
10$ 13.90
25$ 13.43
50$ 12.74
182$ 12.27

Description

General part information

LT5575 Series

The LT5575 is an 800MHz to 2.7GHz direct conversion quadrature demodulator optimized for high linearity receiver applications. It is suitable for communications receivers where an RF signal is directly converted into I and Q baseband signals with bandwidth up to 490MHz. The LT5575 incorporates balanced I and Q mixers, LO buffer amplifi ers and a precision, high frequency quadrature phase shifter. The integrated on-chip broadband transformers provide 50Ω single-ended interfaces at the RF and LO inputs. Only a few external capacitors are needed for its application in an RF receiver system.The high linearity of the LT5575 provides excellent spurfree dynamic range for the receiver. This direct conversion demodulator can eliminate the need for intermediate frequency (IF) signal processing, as well as the corresponding requirements for image filtering and IF filtering. Channel filtering can be performed directly at the outputs of the I and Q channels. These outputs can interface directly to channel-select filters (LPFs) or to baseband amplifiers.ApplicationsCellular/PCS/UMTS InfrastructureRFID ReaderHigh Linearity Direct Conversion I/Q Receiver