TPA711DGN
Active700-MW, MONO, ANALOG INPUT, CLASS-AB AUDIO AMPLIFIER WITH BTL TO SE MODE CONTROL
Deep-Dive with AI
Search across all available documentation for this part.
TPA711DGN
Active700-MW, MONO, ANALOG INPUT, CLASS-AB AUDIO AMPLIFIER WITH BTL TO SE MODE CONTROL
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TPA711DGN | TPA711 Series |
|---|---|---|
| Amplifier Type | - | Class AB |
| Board Type | - | Fully Populated |
| Features | Depop, Short-Circuit, Thermal Protection, Shutdown | Depop, Short-Circuit, Thermal Protection, Shutdown |
| Max Output Power x Channels @ Load | 700 mW | 700 mW |
| Max Output Power x Channels @ Load [custom] | 1 | 1 |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature [Max] | 85 °C | 85 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Type | 1-Channel (Mono) | 1-Channel (Mono) |
| Package / Case | Exposed Pad, 8-MSOP, 8-TSSOP | 8-SOIC, Exposed Pad, 8-MSOP, 8-TSSOP |
| Package / Case | - | 3.9 mm |
| Package / Case [x] | 0.118 in | 0.118 in |
| Package / Case [x] | 3 mm | 3 mm |
| Supplied Contents | - | Board(s) |
| Supplier Device Package | 8-HVSSOP | 8-SOIC, 8-HVSSOP |
| Type | Class AB | Class AB |
| Utilized IC / Part | - | TPA711 |
| Voltage - Supply [Max] | 5.5 V | 5.5 V |
| Voltage - Supply [Min] | 2.5 V | 2.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPA711 Series
EVAL MOD FOR TPA711MSOP
| Part | Max Output Power x Channels @ Load | Max Output Power x Channels @ Load [custom] | Output Type | Supplied Contents | Utilized IC / Part | Amplifier Type | Voltage - Supply [Min] | Voltage - Supply [Max] | Board Type | Type | Package / Case | Package / Case | Features | Mounting Type | Supplier Device Package | Operating Temperature [Max] | Operating Temperature [Min] | Package / Case [x] | Package / Case [x] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPA711MSOPEVMTPA711 - 1-Channel (Mono) Output Class AB Audio Amplifier Evaluation Board | 700 mW | 1 | 1-Channel (Mono) | Board(s) | TPA711 | Class AB | 2.5 V | 5.5 V | Fully Populated | ||||||||||
700 mW | 1 | 1-Channel (Mono) | 2.5 V | 5.5 V | Class AB | 3.9 mm | 8-SOIC | Depop, Short-Circuit, Shutdown, Thermal Protection | Surface Mount | 8-SOIC | 85 °C | -40 °C | |||||||
Texas Instruments TPA711DGNRThe TPA711 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the amplifier to switch from BTL to SEon the flywhen an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which reduces board space by 50% and height by 40%.
The TPA711 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the amplifier to switch from BTL to SEon the flywhen an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which reduces board space by 50% and height by 40%. | 700 mW | 1 | 1-Channel (Mono) | 2.5 V | 5.5 V | Class AB | 8-MSOP, 8-TSSOP, Exposed Pad | Depop, Short-Circuit, Shutdown, Thermal Protection | Surface Mount | 8-HVSSOP | 85 °C | -40 °C | 0.118 in | 3 mm | |||||
Texas Instruments TPA711DThe TPA711 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the amplifier to switch from BTL to SEon the flywhen an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which reduces board space by 50% and height by 40%.
The TPA711 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the amplifier to switch from BTL to SEon the flywhen an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which reduces board space by 50% and height by 40%. | 700 mW | 1 | 1-Channel (Mono) | 2.5 V | 5.5 V | Class AB | 3.9 mm | 8-SOIC | Depop, Short-Circuit, Shutdown, Thermal Protection | Surface Mount | 8-SOIC | 85 °C | -40 °C | ||||||
Texas Instruments TPA711DGNThe TPA711 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the amplifier to switch from BTL to SEon the flywhen an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which reduces board space by 50% and height by 40%.
The TPA711 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the amplifier to switch from BTL to SEon the flywhen an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which reduces board space by 50% and height by 40%. | 700 mW | 1 | 1-Channel (Mono) | 2.5 V | 5.5 V | Class AB | 8-MSOP, 8-TSSOP, Exposed Pad | Depop, Short-Circuit, Shutdown, Thermal Protection | Surface Mount | 8-HVSSOP | 85 °C | -40 °C | 0.118 in | 3 mm | |||||
700 mW | 1 | 1-Channel (Mono) | 2.5 V | 5.5 V | Class AB | 3.9 mm | 8-SOIC | Depop, Short-Circuit, Shutdown, Thermal Protection | Surface Mount | 8-SOIC | 85 °C | -40 °C |
Description
General part information
TPA711 Series
The TPA711 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the amplifier to switch from BTL to SEon the flywhen an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which reduces board space by 50% and height by 40%.
The TPA711 is a bridge-tied load (BTL) or single-ended (SE) audio power amplifier developed especially for low-voltage applications where internal speakers and external earphone operation are required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the amplifier to switch from BTL to SEon the flywhen an earphone drive is required. This eliminates complicated mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which reduces board space by 50% and height by 40%.
Documents
Technical documentation and resources