TPS6755IDRG4

Unknown

Texas Instruments

CONV DC-DC 2.7V TO 9V INV SINGLE-OUT -4.75V TO -5.25V 0.27A 1W 8-PIN SOIC T/R

Deep-Dive with AI

Search across all available documentation for this part.

TPS6755IDRG4

Unknown

Texas Instruments

CONV DC-DC 2.7V TO 9V INV SINGLE-OUT -4.75V TO -5.25V 0.27A 1W 8-PIN SOIC T/R

Deep-Dive with AI

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics commom to parts in this series

Specification	TPS6755IDRG4	TPS6755 Series

Current - Output	270 mA	270 mA
Frequency - Switching	160 kHz	160 kHz
Function	Step-Up/Step-Down	Step-Up/Step-Down
Mounting Type	Surface Mount	Through Hole, Surface Mount
Number of Outputs	1	1
Operating Temperature [Max]	85 °C	85 °C
Operating Temperature [Min]	-40 °C	-40 °C
Output Configuration	Negative	Negative
Output Type	Adjustable	Adjustable
Package / Case	8-SOIC	8-DIP, 8-SOIC
Package / Case	-	0.3 in
Package / Case	-	7.62 mm
Package / Case [x]	0.154 in	0.154 in
Package / Case [y]	3.9 mm	3.9 mm
Supplier Device Package	8-SOIC	8-PDIP, 8-SOIC
Synchronous Rectifier	False	False
Topology	Buck-Boost	Buck-Boost
Voltage - Input (Max) [Max]	9 V	9 V
Voltage - Input (Min) [Min]	2.7 V	2.7 V
Voltage - Output (Max) [Max]	-9.3 V	-9.3 V
Voltage - Output (Min/Fixed)	-1.22 V	-1.22 V

TPS6755 Series

Adjustable Inverting DC/DC Converter

Part	Frequency - Switching	Topology	Current - Output	Output Type	Operating Temperature [Max]	Operating Temperature [Min]	Function	Output Configuration	Voltage - Output (Max) [Max]	Supplier Device Package	Voltage - Input (Max) [Max]	Number of Outputs	Voltage - Input (Min) [Min]	Mounting Type	Package / Case	Package / Case	Package / Case	Voltage - Output (Min/Fixed)	Package / Case [y]	Package / Case [x]
Texas Instruments TPS6755IPG4	160 kHz	Buck-Boost	270 mA	Adjustable	85 °C	-40 °C	Step-Up/Step-Down	Negative	-9.3 V	8-PDIP	9 V	1	2.7 V	Through Hole	0.3 in	8-DIP	7.62 mm	-1.22 V
Texas Instruments TPS6755IP	160 kHz	Buck-Boost	270 mA	Adjustable	85 °C	-40 °C	Step-Up/Step-Down	Negative	-9.3 V	8-PDIP	9 V	1	2.7 V	Through Hole	0.3 in	8-DIP	7.62 mm	-1.22 V
Texas Instruments TPS6755ID	160 kHz	Buck-Boost	270 mA	Adjustable	85 °C	-40 °C	Step-Up/Step-Down	Negative	-9.3 V	8-SOIC	9 V	1	2.7 V	Surface Mount		8-SOIC		-1.22 V	3.9 mm	0.154 in
Texas Instruments TPS6755IDR	160 kHz	Buck-Boost	270 mA	Adjustable	85 °C	-40 °C	Step-Up/Step-Down	Negative	-9.3 V	8-SOIC	9 V	1	2.7 V	Surface Mount		8-SOIC		-1.22 V	3.9 mm	0.154 in
Texas Instruments TPS6755IDRG4	160 kHz	Buck-Boost	270 mA	Adjustable	85 °C	-40 °C	Step-Up/Step-Down	Negative	-9.3 V	8-SOIC	9 V	1	2.7 V	Surface Mount		8-SOIC		-1.22 V	3.9 mm	0.154 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tape & Reel (TR)	2500	$ 2.00
		5000	$ 1.93

Description

General part information

TPS6755 Series

The TPS6755 is an adjustable inverting dc/dc converter capable of operating from inputs as low as 2.7 V. The only external components required are an inductor, an output filter capacitor, an input filter capacitor, a reference filter capacitor, two resistors, and a Schottky rectifier. An enable input is provided to shut down the inverter when an output voltage is not needed. The typical supply current is 1.9 mA at no-load and is further reduced to 1-uA when the enable input is low.

The device features a 160-kHz current-mode pulse-width-modulation (PWM) controller with a p-channel MOSFET power switch. The gate drive uses the converter output to reduce the die area needed to realize the 0.4-MOSFET. Soft start is accomplished with the addition of one small capacitor at SS. A 1.22-V reference is available for external loads up to 125 uA.

The TPS6755 is attractive for board-level dc/dc conversion in computer peripherals and in battery-powered equipment requiring high efficiency and low supply current.

Documents

Technical documentation and resources

No documents available