MAX1203AEAP

Obsolete

Analog Devices Inc./Maxim Integrated

IC ADC 12BIT SAR 20SSOP

Find alt

Alpha

MAX1203AEAP

Obsolete

Analog Devices Inc./Maxim Integrated

IC ADC 12BIT SAR 20SSOP

Find alt

Alpha

Description Specifications Series Pricing CAD Documents

Description

General part information

MAX1203 Series

The MAX1202/MAX1203 are 12-bit data-acquisition systems specifically designed for use in applications with mixed +5V (analog) and +3V (digital) supply voltages. They operate with a single +5V analog supply or dual ±5V analog supplies, and combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption.A 4-wire serial interface connects directly to SPI/MICROWIRE®devices without external logic, and a serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1202/MAX1203 use either the internal clock or an external serial-interface clock to perform successive approximation analog-to-digital conversions. The serial interface operates at up to 2MHz.The MAX1202 features an internal 4.096V reference, while the MAX1203 requires an external reference. Both parts have a reference-buffer amplifier that simplifies gain trim. They also have a VLpin that is the power supply for the digital outputs. Output logic levels (3V, 3.3V, or 5V) are determined by the value of the voltage applied to this pin.These devices provide a hard-wired active-low SHDN pin and two software-selectable power-down modes. Accessing the serial interface automatically powers up the devices. A quick turn-on time enables the MAX1202/MAX1203 to be shut down between conversions, allowing the user to optimize supply currents. By customizing power-down between conversions, supply current can drop below 10µA at reduced sampling rates.The MAX1202/MAX1203 are available in 20-pin SSOP and PDIP packages, and are specified for the commercial and extended temperature ranges.Applications5V/3V Mixed-Supply SystemsBattery-Powered ApplicationsData AcquisitionHigh-Accuracy Process ControlMedical Instruments

Technical Specifications

Parameters and characteristics for this part

Specification	MAX1203AEAP

Architecture	SAR
Configuration	MUX-S/H-ADC
Data Interface	SPI
Input Type	Single Ended, Differential
Mounting Type	Surface Mount
Number of A/D Converters	1 count
Number of Bits	12 bits
Number of Inputs	4, 8
Operating Temperature (Max)	85 °C
Operating Temperature (Min)	-40 °C
Package Length	0.209 in
Package Name	20-SSOP
Package Width	5.3 mm
Ratio - ADC	1
Ratio - S/H	1
Reference Type	External
Sampling Rate (Per Second)	133 kHz
Voltage - Supply, Analog	5 V
Voltage - Supply, Analog (Additional)	5 V
Voltage - Supply, Analog (Nominal Negative)	-5 V
Voltage - Supply, Analog (Nominal Positive)	5 V
Voltage - Supply, Digital (Max)	5.25 V
Voltage - Supply, Digital (Min)	2.7 V

MAX1203 Series

5V, 8-Channel, Serial, 12-Bit ADCs with 3V Digital Interface

Part	Mounting Type	Sampling Rate (Per Second)	Number of A/D Converters	Package Width	Package Name	Package Length	Voltage - Supply, Analog (Additional)	Voltage - Supply, Analog	Voltage - Supply, Analog (Nominal Positive)	Voltage - Supply, Analog (Nominal Negative)	Number of Inputs	Data Interface	Configuration	Voltage - Supply, Digital (Min)	Voltage - Supply, Digital (Max)	Reference Type	Ratio - ADC	Ratio - S/H	Number of Bits	Architecture	Input Type	Operating Temperature (Max)	Operating Temperature (Min)
Analog Devices Inc./Maxim Integrated MAX1203ACAP+T	Surface Mount	133 kHz	1 count	5.3 mm	20-SSOP	0.209 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	70 °C	0 °C
Analog Devices Inc./Maxim Integrated MAX1203ACAP	Surface Mount	133 kHz	1 count	5.3 mm	20-SSOP	0.209 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	70 °C	0 °C
Analog Devices Inc./Maxim Integrated MAX1203AEPP+	Through Hole	133 kHz	1 count	7.62 mm	20-DIP 20-PDIP	0.3 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	85 °C	-40 °C
Analog Devices Inc./Maxim Integrated MAX1203ACAP+	Surface Mount	133 kHz	1 count	5.3 mm	20-SSOP	0.209 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	70 °C	0 °C
Analog Devices Inc./Maxim Integrated MAX1203BCAP+T	Surface Mount	133 kHz	1 count	5.3 mm	20-SSOP	0.209 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	70 °C	0 °C
Analog Devices Inc./Maxim Integrated MAX1203BCAP+	Surface Mount	133 kHz	1 count	5.3 mm	20-SSOP	0.209 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	70 °C	0 °C
Analog Devices Inc./Maxim Integrated MAX1203BCAP	Surface Mount	133 kHz	1 count	5.3 mm	20-SSOP	0.209 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	70 °C	0 °C
Analog Devices Inc./Maxim Integrated MAX1203BCPP	Through Hole	133 kHz	1 count	7.62 mm	20-DIP 20-PDIP	0.3 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	70 °C	0 °C
Analog Devices Inc./Maxim Integrated MAX1203AEAP	Surface Mount	133 kHz	1 count	5.3 mm	20-SSOP	0.209 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	85 °C	-40 °C
Analog Devices Inc./Maxim Integrated MAX1203BEAP+	Surface Mount	133 kHz	1 count	5.3 mm	20-SSOP	0.209 in	5 V	5 V	5 V	-5 V	4 8	SPI	MUX-S/H-ADC	2.7 V	5.25 V	External	1	1	12 bits	SAR	Differential Single Ended	85 °C	-40 °C

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Create a free account to access distributor pricing data.

CAD

3D models and CAD resources for this part

Documents

Technical documentation and resources

Datasheet

MAX1203AEAP | Datasheet