
LT3685IMSE#PBF
ActiveDC-DC SWITCHING BUCK REGULATOR, ADJUSTABLE, 3.6 TO 36V IN, 0.79 TO 20V/2A OUT, MSOP-EP-10
Deep-Dive with AI
Search across all available documentation for this part.

LT3685IMSE#PBF
ActiveDC-DC SWITCHING BUCK REGULATOR, ADJUSTABLE, 3.6 TO 36V IN, 0.79 TO 20V/2A OUT, MSOP-EP-10
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LT3685IMSE#PBF |
|---|---|
| Current - Output | 2 A |
| Frequency - Switching [Max] | 2.4 MHz |
| Frequency - Switching [Min] | 200 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 3 Lead, 0.118 in |
| Package / Case | Exposed Pad, 10-TFSOP, 10-MSOP |
| Supplier Device Package | 10-MSOP-EP |
| Synchronous Rectifier | False |
| Topology | Buck |
| Voltage - Input (Max) [Max] | 36 V |
| Voltage - Input (Min) [Min] | 3.6 V |
| Voltage - Output (Max) [Max] | 20 V |
| Voltage - Output (Min/Fixed) [Min] | 0.79 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
Description
General part information
LT3685 Series
The LT3685 is an adjustable frequency (200kHz to 2.4MHz) monolithic step-down switching regulator that accepts input voltages up to 38V operating and 60V maximum. An internal overvoltage protection circuit turns off the power switch when VINis above 38V typical (36V minimum) which then allows the part to safely withstand 60V transients. A high efficiency 0.25Ω switch is included on the die along with a boost Schottky diode and the necessary oscillator, control, and logic circuitry. Current mode topology is used for fast transient response and good loop stability. The LT3685’s high operating frequency allows the use of small, low cost inductors and ceramic capacitors resulting in low output ripple while keeping total solution size to a minimum. The low current shutdown mode reduces input supply current to less than 1μA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUTreaches 89% of the programmed output voltage. The LT3685 is available in 10-Pin MSOP and 3mm × 3mm DFN packages with exposed pads for low thermal resistance.ApplicationsAutomotive Battery RegulationSet Top BoxDistributed Supply RegulationIndustrial SuppliesWall Transformer Regulation
Documents
Technical documentation and resources