Zenode.ai Logo
Beta
K
LT5546EUF#PBF - 16 QFN EP

LT5546EUF#PBF

Active
Analog Devices

RF IC, I/Q DEMODULATOR, 40 TO 500 MHZ, 1.8 TO 5.25 V SUPPLY, -40 TO 85 °C, QFN-EP-16

Deep-Dive with AI

Search across all available documentation for this part.

LT5546EUF#PBF - 16 QFN EP

LT5546EUF#PBF

Active
Analog Devices

RF IC, I/Q DEMODULATOR, 40 TO 500 MHZ, 1.8 TO 5.25 V SUPPLY, -40 TO 85 °C, QFN-EP-16

Deep-Dive with AI

Technical Specifications

Parameters and characteristics for this part

SpecificationLT5546EUF#PBF
Current - Supply24 mA
FunctionDemodulator
LO Frequency [Max]1 GHz
LO Frequency [Min]80 MHz
Mounting TypeSurface Mount
Noise Figure7.8 dB
P1dB-10 dBm
Package / Case16-WQFN Exposed Pad
RF Frequency [Max]500 MHz
RF Frequency [Min]40 MHz
Supplier Device Package16-QFN (4x4)
Voltage - Supply [Max]5.25 V
Voltage - Supply [Min]1.8 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyTube 1$ 8.91
10$ 6.29
25$ 5.85
NewarkEach 1$ 8.86
10$ 6.97
25$ 6.59
50$ 6.30
182$ 6.04

Description

General part information

LT5546 Series

The LT5546 is a 40MHz to 500MHz monolithic integrated quadrature demodulator with variable gain amplifier (VGA) and 17MHz I/Q baseband bandwidth designed for low voltage operation. It supports standards that use a linear modulation format. The chip consists of a VGA, quadrature down-converting mixers and 17MHz lowpass noise filters (LPF). The LO port consists of a divide-by-two stage and LO buffers. The IC provides all building blocks for IF down-conversion to I and Q baseband signals with a single supply voltage of 1.8V to 5.25V. The VGA gain has a linear-in-dB relationship to the control input voltage. Hard-clipping amplifiers at the mixer outputs reduce the recovery time from a signal overload condition. The lowpass filters reduce the out-of-band noise and spurious frequency components. The –3dB corner frequency of the noise filters is approximately 17MHz and has a first order roll-off. The standby mode provides reduced supply current and fast transient response into the normal operating mode when the I/Q outputs are AC-coupled to a baseband chip.ApplicationsGPS IF ReceiversSatellite IF ReceiversVHF/UHF ReceiversWireless Local Loop