ZXLD1615ET5TA
ActiveADJUSTABLE DC-DC BOOST CONVERTER WITH INTERNAL SWITCH
Deep-Dive with AI
Search across all available documentation for this part.
ZXLD1615ET5TA
ActiveADJUSTABLE DC-DC BOOST CONVERTER WITH INTERNAL SWITCH
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | ZXLD1615ET5TA |
|---|---|
| Current - Output | 500 mA |
| Frequency - Switching [Max] | 1 MHz |
| Function | Step-Up, Step-Up/Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Synchronous Rectifier | False |
| Topology | Flyback, SEPIC, Boost |
| Voltage - Input (Max) [Max] | 5.5 V |
| Voltage - Input (Min) [Min] | 2.5 V |
| Voltage - Output (Max) | 28 V |
| Voltage - Output (Min/Fixed) | 2.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.61 | |
| 10 | $ 1.44 | |||
| 25 | $ 1.36 | |||
| 100 | $ 1.16 | |||
| 250 | $ 1.09 | |||
| 500 | $ 0.95 | |||
| 1000 | $ 0.79 | |||
| Digi-Reel® | 1 | $ 1.61 | ||
| 10 | $ 1.44 | |||
| 25 | $ 1.36 | |||
| 100 | $ 1.16 | |||
| 250 | $ 1.09 | |||
| 500 | $ 0.95 | |||
| 1000 | $ 0.79 | |||
| Tape & Reel (TR) | 3000 | $ 0.76 | ||
| 6000 | $ 0.72 | |||
| 9000 | $ 0.70 | |||
Description
General part information
ZXLD1615 Series
The ZXLD1615 is a PFM inductive boost converter designed to provide output voltages of up to 28V from a 2.5V to 5.5V input supply. The ZXLD1615 includes the output switch and peak current sense resistor, and can provide up to 10mA output current at maximum output voltage. Higher current is available at lower output voltages. Quiescent current is typically 60μA and a shutdown function is provided to reduce this current to less than 100nA in the 'off' state. Nominal output voltage can be set up to a maximum of 28V by two external resistors and can be adjusted to lower values by a PWM control signal applied to the 'Enable' pin. Depending upon the control frequency, the PWM signal will provide either continuous (low ripple) or gated control. The PWM filter components are contained within the chip. Minimum output voltage is determined by the input supply. The device is assembled in a low profile TSOT25 pin package.
Documents
Technical documentation and resources