Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TPS75701KTTT | TPS75701 Series |
|---|---|---|
| Control Features | Power Good, Enable | Power Good, Enable |
| Current - Output | 3 A | 3 A |
| Current - Quiescent (Iq) | 200 µA | 200 µA |
| Mounting Type | Surface Mount | Through Hole, Surface Mount |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | Adjustable | Adjustable |
| Package / Case | TO-263BA, D2PAK (5 Leads + Tab), TO-263-6 | TO-220-5, TO-263BA, D2PAK (5 Leads + Tab), TO-263-6 |
| Protection Features | Over Current, Reverse Polarity, Under Voltage Lockout (UVLO), Over Temperature | Over Current, Reverse Polarity, Under Voltage Lockout (UVLO), Over Temperature |
| PSRR | 62 dB | 62 dB |
| Supplier Device Package | TO-263 (DDPAK-5) | TO-220-5, TO-263 (DDPAK-5) |
| Voltage - Input (Max) [Max] | 5.5 V | 5.5 V |
| Voltage - Output (Max) [Max] | 5 V | 5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPS75701 Series
IC REG LINEAR POS ADJ 3A TO220-5
| Part | Control Features | Current - Quiescent (Iq) | Mounting Type | PSRR | Current - Output | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Output (Max) [Max] | Protection Features | Voltage - Input (Max) [Max] | Number of Regulators | Supplier Device Package | Package / Case | Output Configuration | Output Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Enable, Power Good | 200 µA | Through Hole | 62 dB | 3 A | 125 °C | -40 °C | 5 V | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | 5.5 V | 1 | TO-220-5 | TO-220-5 | Positive | Adjustable | |
Texas Instruments TPS75701KCThe TPS757xx family of 3-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG) and an adjustable voltage option regulator. These devices are capable of supplying 3 A of output current with a dropout of 150 mV (TPS75733). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 µA at full load and drops down to less than 1 µA when the device is disabled. The TPS757xx is designed to have fast transient response for large load current changes.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is low (typically 150 mV at an output current of 3 A for the TPS75733) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is low and independent of output loading (typically 125 &miccro;A over the full range of output current). These two key specifications yield a significant improvement in operating life for battery-powered systems.
The device is enabled whenENis connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal toEN(enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ= 25°C. The power-good terminal (PG) is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.
The TPS757xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.22 V to 5 V). Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS757xx family is available in a 5-pin TO-220 (KC) and TO-263 (KTT) packages.
The TPS757xx family of 3-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG) and an adjustable voltage option regulator. These devices are capable of supplying 3 A of output current with a dropout of 150 mV (TPS75733). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 µA at full load and drops down to less than 1 µA when the device is disabled. The TPS757xx is designed to have fast transient response for large load current changes.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is low (typically 150 mV at an output current of 3 A for the TPS75733) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is low and independent of output loading (typically 125 &miccro;A over the full range of output current). These two key specifications yield a significant improvement in operating life for battery-powered systems.
The device is enabled whenENis connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal toEN(enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ= 25°C. The power-good terminal (PG) is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.
The TPS757xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.22 V to 5 V). Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS757xx family is available in a 5-pin TO-220 (KC) and TO-263 (KTT) packages. | Enable, Power Good | 200 µA | Through Hole | 62 dB | 3 A | 125 °C | -40 °C | 5 V | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | 5.5 V | 1 | TO-220-5 | TO-220-5 | Positive | Adjustable |
Texas Instruments TPS75701KTTTLinear Voltage Regulator IC Positive Adjustable 1 Output 3A TO-263 (DDPAK-5) | Enable, Power Good | 200 µA | Surface Mount | 62 dB | 3 A | 125 °C | -40 °C | 5 V | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | 5.5 V | 1 | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Positive | Adjustable |
Texas Instruments TPS75701KTTRThe TPS757xx family of 3-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG) and an adjustable voltage option regulator. These devices are capable of supplying 3 A of output current with a dropout of 150 mV (TPS75733). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 µA at full load and drops down to less than 1 µA when the device is disabled. The TPS757xx is designed to have fast transient response for large load current changes.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is low (typically 150 mV at an output current of 3 A for the TPS75733) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is low and independent of output loading (typically 125 &miccro;A over the full range of output current). These two key specifications yield a significant improvement in operating life for battery-powered systems.
The device is enabled whenENis connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal toEN(enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ= 25°C. The power-good terminal (PG) is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.
The TPS757xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.22 V to 5 V). Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS757xx family is available in a 5-pin TO-220 (KC) and TO-263 (KTT) packages.
The TPS757xx family of 3-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG) and an adjustable voltage option regulator. These devices are capable of supplying 3 A of output current with a dropout of 150 mV (TPS75733). Therefore, the device is capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 µA at full load and drops down to less than 1 µA when the device is disabled. The TPS757xx is designed to have fast transient response for large load current changes.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is low (typically 150 mV at an output current of 3 A for the TPS75733) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is low and independent of output loading (typically 125 &miccro;A over the full range of output current). These two key specifications yield a significant improvement in operating life for battery-powered systems.
The device is enabled whenENis connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal toEN(enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ= 25°C. The power-good terminal (PG) is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.
The TPS757xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.22 V to 5 V). Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS757xx family is available in a 5-pin TO-220 (KC) and TO-263 (KTT) packages. | Enable, Power Good | 200 µA | Surface Mount | 62 dB | 3 A | 125 °C | -40 °C | 5 V | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | 5.5 V | 1 | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Positive | Adjustable |
Description
General part information
TPS75701 Series
Linear Voltage Regulator IC Positive Adjustable 1 Output 3A TO-263 (DDPAK-5)